---
url: /accounts/account-details.md
description: >-
  What the Account Details dialog shows — balance and equity, broker
  information, trading configuration, provider and account state, your symbol
  list, and how to disconnect.
---

# Account Details

Click any account card and the Account Details dialog opens — the full picture of one account's money, broker setup, and trading configuration in one place. Use it to confirm an account is set up the way you expect, to read your live balance and equity, and to disconnect when you're done. This page walks through each section the dialog actually shows.

## Opening the dialog

Click an account card on the Accounts page (`/dashboard/accounts`). The Settings page points here too: its **Elsewhere** box says "Account name, currency, pause trading: Accounts". The header account switcher picks which account the dashboard shows; it does not open this dialog.

## Account summary

The top section shows the account's vital figures at a glance:

| Field | What it means |
|-------|---------------|
| Account name | The account's identifier on your broker |
| Account type | Demo, Live, or Prop Firm |
| Provider | How TTMT connects to this account. Shown for **Self-Host Client** accounts; a **MetaAPI Cloud** account shows no provider label (see below) |
| Balance | Closed funds — changes only when a trade closes or you deposit/withdraw |
| Equity | Balance plus or minus the floating profit and loss of open positions; moves in real time |
| Currency | The account's currency, which its figures are read in (editable — see below) |
| Margin level | Equity versus used margin, shown as a percentage — a rough risk gauge |
| Active trades | How many positions TTMT is currently managing on this account |

**Balance** is your settled money. It sits still until a trade closes or you move funds in or out. **Equity** is balance adjusted for everything currently open, so it ticks up and down with the market — it's the real-time value of the account.

Margin level is just the raw broker ratio of equity to used margin. It is a quick gauge, not a TTMT safety threshold. For the protections TTMT actually runs, see the callout below.

::: info Drawdown warnings, not margin tables
TTMT's drawdown safety net is [Recovery Guidance](/core-concepts/risk-management) — advisory warnings at 10%, 20%, and 40% of today's loss measured against your current balance. The enforced cap is the per-account daily limits (**Settings › Daily limits**, see [Risk Limits and halt](/safety-and-reliability/risk-limits-halt)), which pause trading automatically. The margin level shown here is unrelated to either; it's the broker's own ratio.
:::

## Broker information

This section reflects what your broker reported when the account connected:

| Row | What it means |
|-----|---------------|
| Margin Mode | The margin model your broker uses for this account |
| Leverage | Shown as `1:N` (for example `1:100`) |
| Trade Allowed | Whether the broker permits trading on this account (Yes/No) |
| Investor Mode | Shown when the account is connected read-only — trading is not possible |
| Credit | Shown when the account carries a broker credit balance above zero |
| Free Margin | Equity minus used margin — what's available to open new trades |

**Free Margin** is the headroom you have left. When it reaches zero, the broker won't let new trades open.

::: warning Investor (read-only) mode
If Investor Mode shows as on / read-only, the account was connected with the broker's *investor* password instead of the trading password. In that mode the broker blocks all order placement, so signals will arrive and produce nothing. This is one of the most common "why won't my account trade?" causes. Reconnect the account with the trading password to fix it.
:::

## Trading configuration

This section controls how TTMT trades on the account:

| Row | What it does |
|-----|--------------|
| Trading Active / Paused | The per-account on-off switch for signal execution — the same toggle as on the account card |
| Manage settings | Jumps to the Settings page, on whichever account is selected |
| Manage symbols | Jumps to **Settings › Symbol mappings** for this account |
| Magic Number | A broker-side identifier TTMT tags its trades with |
| Manual Trades | Whether manually-opened trades are tracked alongside TTMT's |
| Reliability | A connection-handling preference |
| Primary Replica | Which broker connection node serves this account |

Magic Number, Reliability, and Primary Replica are advanced broker-side identifiers. Most traders never need to change them.

## Provider and account state

The dialog also tells you *how* TTMT reaches this account and *where the account sits in its lifecycle* — two different questions from the live health dot on the card.

**Provider** is the connection path:

* **Self-Host Client** — picked for MT5 accounts on brokers TTMT supports when a Self-Host connection is available, and the provider of any account upgraded from MetaAPI Cloud. The dialog shows a **Self-Host Client** label and a **Gateway / Self-Host** section.
* **MetaAPI Cloud** — picked for MT4 accounts, for MT5 accounts on brokers TTMT does not support yet, and for any MT5 account connected while no Self-Host connection is available. TTMT connects to your broker through MetaAPI's cloud. The dialog shows no provider label.

TTMT picks the provider when the account is connected; you do not choose. See [Self-host providers](/accounts/self-host) for the differences.

**Account state** is about whether the account is set up to route signals at all — separate from "is the connection healthy right now." An account can be *Provisioned* (live and routing), *Disconnected* (temporarily down; assignments stay in place), *Undeployed* (removed; assignments auto-pause), or *Inactive* (deactivated for billing or admin reasons). See [Connecting an account](/accounts/single-account#account-states-beyond-health) for the full list.

## Editing your account currency

The currency shown in the account summary is editable inline. Click the pencil next to **Currency** ("Click to change currency") and pick from the list. This is the account's own currency, the one its balance, equity and amounts such as **Amount per signal** are read in — useful when an account is funded in one currency but the dialog defaulted to another. Your broker sync can overwrite it on a refresh, so if it keeps reverting, the broker is reporting a different currency.

For example, if your figures read in USD but the account is actually funded in EUR, switch the currency here so the balances read correctly.

This is not the **Display currency** on your Profile page, which converts balances, profit and loss, and totals across your accounts into one currency of your choice for display. That one is not set per account, and account cards keep showing each account's own currency.

## Your symbol list

The symbol view shows the instruments discovered on your broker, their mapping status, and asset class. Discovery runs automatically when the account connects, so the list fills in on its own.

If your broker adds or removes instruments later, re-scan with **Refresh from broker** in **Settings › Symbol mappings** — the rescan lives there, not in this dialog. For how matching works and how to fix unmapped symbols, see [Symbol mapping](/accounts/symbol-mapping).

## A note on the technical details

The dialog also lists low-level connection identifiers — an account ID, resource and quote settings, and a few advanced connection flags. These are for diagnostics and TTMT's own internals. You don't need to read or change any of them for normal trading.

## Disconnecting

The dialog includes a **Disconnect** option to remove the account from TTMT. See [Connecting an account](/accounts/single-account#disconnecting-an-account) for the full flow.

::: warning Before disconnecting
Disconnecting stops execution on this account immediately. Its channel assignments are automatically paused so no further signals route to it, and TTMT stops managing any trades still open on the broker — those positions remain on the broker but are no longer watched, modified, or closed by TTMT. Close or transfer open positions first if you don't want them left unmanaged.
:::

## Card vs dialog

The account card and the dialog show different depths of information:

| Information | Account card | Details dialog |
|-------------|:---:|:---:|
| Account name & type | Yes | Yes |
| Balance & equity | Yes | Yes |
| Margin level | Yes | Yes |
| Active trades count | Yes | Yes |
| Connection health | Yes | Yes |
| Trading toggle | Yes | Yes |
| Risk Limits status | Yes | Yes |
| Symbol Mapping warning (when present) | Yes | Yes |
| Broker information | No | Yes |
| Trading configuration | No | Yes |
| Editable currency | No | Yes |
| Full symbol list | No | Yes |
| Disconnect | No | Yes |

The card is for quick glances — is this account healthy? The dialog is for investigation — why is something not working the way you expect?

## Troubleshooting stale data

If balance or equity look outdated, the data feed — not the trade — is usually the issue:

* Check the connection health dot. Degraded (yellow) or Disconnected (red) means data isn't updating.
* Watch for the staleness warning banner, which appears automatically when the feed falls behind.

For example, an account that dropped overnight may still show last night's equity in the dialog while the connection dot is yellow — that's a stale feed, not a vanished trade. See [Connection issues](/troubleshooting/connection-issues) for recovery steps.

## Related pages

* [Connecting an account](/accounts/single-account)
* [Multi-account management](/accounts/multi-account)
* [Self-host providers](/accounts/self-host)
* [Symbol mapping](/accounts/symbol-mapping)
* [Risk Limits and halt](/safety-and-reliability/risk-limits-halt)
* [Connection issues](/troubleshooting/connection-issues)
