---
url: /core-concepts/breakeven-management.md
description: >-
  How TTMT moves your stop to entry once a trade profits — at a TP level or once
  in profit, how Lock in profit at each TP moves it to earlier TP prices, the
  fallback when a move can't be placed, and how trailing stops work.
---

# Breakeven Management

The worst feeling in trading is watching a winner turn into a loser. Breakeven management fixes that: once your trade reaches a profit milestone, TTMT moves your stop to your entry price plus a small buffer, so a reversal costs you nothing instead of giving back the gain. This page covers when breakeven fires, what happens when it cannot be set, and how it cooperates with trailing stops.

***

## How automatic breakeven works

When a trade hits its trigger TP — TP1 by default — TTMT moves the stop on every remaining open position for that trade from below entry to entry plus a small buffer.

* **Original stop:** below entry, risking capital
* **New stop:** entry plus buffer, risk-free

```mermaid
flowchart TD
    A["Watching the trade"] --> B{"TP hit?"}
    B -->|No| A
    B -->|Yes| C{"Meets your trigger level?"}
    C -->|No| D["Keep waiting for a higher TP"]
    D --> A
    C -->|Yes| E["Move stop to entry + buffer"]
    E --> F{"Broker confirmed?"}
    F -->|Yes| G["Breakeven secured"]
    F -->|No| H["Retry until confirmed"]
    H --> F

    style A fill:#023e8a,stroke:#0096c7,color:#e6f6ff
    style B fill:#14304d,stroke:#0096c7,color:#e6f6ff
    style C fill:#14304d,stroke:#0096c7,color:#e6f6ff
    style D fill:#5a4708,stroke:#e7c000,color:#fff6d6
    style E fill:#0d4f3c,stroke:#36d399,color:#d6fff0
    style F fill:#14304d,stroke:#0096c7,color:#e6f6ff
    style G fill:#0d4f3c,stroke:#36d399,color:#d6fff0
    style H fill:#5a4708,stroke:#e7c000,color:#fff6d6
```

::: success You lose nothing after breakeven
Once breakeven is set, if price reverses and hits your new stop, you exit at entry plus the buffer. You lose nothing, and you usually cover spread and swap. Without breakeven, that same trade would have hit TP1 in profit, reversed all the way back, and closed at your original stop for a loss.
:::

***

## Configuring breakeven

Breakeven settings live in **Settings › Protect open trades**, except the channel-message switch, which sits under **Settings › Channel updates**.

| Setting | What it does | Default |
|:--------|:-------------|:--------|
| **Auto-Breakeven** | The TP level that fires breakeven: **Never**, or TP1 through TP6. Deeper levels give the trade more room before going risk-free. **Never** turns off Auto-Breakeven; **Breakeven once in profit** is a separate setting. | TP1 |
| **Lock in a small profit** | Pips the stop is moved beyond entry, so the breakeven exit covers spread, commission, and swap. Range 0–50. It is read whenever breakeven places a stop: at a TP level, once in profit, or from a channel message. A stop move to a TP goes to the TP price, or to the position's entry plus this buffer if that protects more. | 2 pips |
| **Breakeven once in profit** | Sets breakeven once the trade is a set distance in profit, measured from the worst filled entry. See [Breakeven once in profit](#breakeven-once-in-profit). | Off |
| **Measure in** | The unit of that distance: **Pips**, **R** or **Money** (your account currency). Shown while Breakeven once in profit is on. | Pips |
| **When profit reaches** | The distance. Enter a value above 0: at most 10000 pips, 20 R or 1000000000 in your account currency. Shown while Breakeven once in profit is on. | Not set |
| **Lock in profit at each TP** | When price reaches a TP, the stop goes to the price of an earlier TP. See [Lock in profit at each TP](#lock-in-profit-at-each-tp). | Off |
| **Stop goes to** | Which earlier TP: **Previous TP**, **2 TPs earlier** or **3 TPs earlier**. Shown while Lock in profit at each TP is on. | Previous TP |
| **Follow 'move to breakeven' messages** (Channel updates) | On/off. Whether a "set BE" message from your channel can fire breakeven. | On |
| **If the stop can't move to entry in time** (Full view) | What to do when moving the stop to entry fails for a reason other than the stop being too close to price. See [the fallback section](#when-breakeven-can-t-be-set-the-fallback). | Keep the stop |

Setting **Auto-Breakeven** to **Never** turns off Auto-Breakeven. Breakeven once in profit still works if it's on, and so do channel "set BE" messages if **Follow 'move to breakeven' messages** is on.

**Lock in a small profit** is disabled only when no breakeven source is on. It then reads: "This needs Auto-Breakeven, Breakeven once in profit, or Signal-Driven Breakeven."

::: info Two new settings, marked Experimental
**Breakeven once in profit** and **Lock in profit at each TP** both carry an **Experimental** marker in Settings. Both are off by default. While they are off, breakeven works as it did before they existed.
:::

Under the section, **What happens at each TP** turns your settings into a sample trade. It lists each TP with its price, the lots it closes, and where the stop goes after it. It updates as you change a setting, before you save.

***

## Breakeven once in profit {#breakeven-once-in-profit}

Auto-Breakeven waits for a target. **Breakeven once in profit** sets breakeven as soon as the trade is a set distance in profit, even before TP1 is reached.

* Profit is measured from the **worst filled entry**: the highest open entry on a BUY, the lowest open entry on a SELL.
* Price is the bid for a buy and the ask for a sell.
* It waits until the first order fills.
* It fires once per trade. Each position goes to its own entry plus or minus the **Lock in a small profit** buffer.
* Orders that fill after that get no move from it. Auto-Breakeven, or Lock in profit at each TP, can still move their stop.
* A breakeven stop it set stays, even if a deeper order fills later.
* On a trailing position it moves the stop only if that protects more, and trailing continues. It skips positions whose stop you changed yourself.
* If **Auto-Breakeven** also names a TP, breakeven is set by whichever comes first.

You choose the unit in **Measure in**:

| Unit | How the distance is counted |
|:--|:--|
| **Pips** | Pips from the worst filled entry. |
| **R** | 1R is the distance from the worst filled entry to the stop when the first order filled. If a trade had no stop when its first order filled, R can't be measured and the threshold isn't checked on that trade. The same applies to trades opened before this setting existed. |
| **Money** | Counted in your account currency as if every open lot had the worst filled entry. Your real open profit is the same or higher when it fires. Swap and commission are not counted. Money is checked only when TTMT knows the contract size and a currency rate for the symbol. If it doesn't, the threshold isn't checked on that trade. |

::: info Example — 15 pips, BUY and SELL
**BUY EURUSD.** Layer 1 fills at 1.1000 and layer 2 at 1.0990. The worst filled entry is 1.1000. When the bid reaches 1.1015, the trade is 15 pips in profit and TTMT sets breakeven. With a 2-pip buffer the two stops go to 1.1002 and 1.0992: each position's own entry plus 2 pips.

**SELL EURUSD.** Layer 1 fills at 1.1000 and layer 2 at 1.1010. The worst filled entry is 1.1000. When the ask reaches 1.0985, TTMT sets breakeven. The two stops go to 1.0998 and 1.1008: each position's own entry minus 2 pips.
:::

::: info Example — 0.5 R
**BUY.** The first order fills at 1.1000 with the stop at 1.0960. 1R is 40 pips, so 0.5 R is 20 pips. Breakeven is set when the bid reaches 1.1020.

**SELL.** The first order fills at 1.1000 with the stop at 1.1040. 1R is 40 pips. Breakeven is set when the ask reaches 1.0980.
:::

::: info Example — Money
**USD account.** On EURUSD, one pip on 1 lot is worth $10. With 0.30 lots open, one pip is worth $3. A value of 45 is reached 15 pips from the worst filled entry: at 1.1015 on the BUY above, at 1.0985 on the SELL.

**Cent account (USC).** The value is in the account currency, so you enter cents. 4500 on a USC account means 4500 USC, which is $45.
:::

A preset's money value is read in each account's own currency. If the accounts using a preset have different currencies, the preset editor warns you and names the amount on each account.

***

## Lock in profit at each TP {#lock-in-profit-at-each-tp}

Without this setting, breakeven moves the stop once, to entry plus the buffer. With **Lock in profit at each TP** on, the stop keeps moving as the trade reaches later targets. When price reaches a TP, the stop goes to the price of an earlier TP.

* Stop moves start once breakeven is set. TTMT never moves the stop back.
* It needs a breakeven source: **Auto-Breakeven** set to a TP, or **Breakeven once in profit** on. Without one, the switch is disabled and reads: "This needs Auto-Breakeven, or Breakeven once in profit." If it is already on, it stays on and reads: "Not active: this needs Auto-Breakeven, or Breakeven once in profit. Your choice is kept."
* Each position's stop goes to the TP price, or to its own entry plus or minus the **Lock in a small profit** buffer, whichever protects more.
* **Stop goes to** sets which earlier TP: **Previous TP**, **2 TPs earlier** or **3 TPs earlier**. Only TPs with a price count. A TP with no price (a runner) never moves the stop.
* If price passes several TPs at once, the stop makes one move, to the furthest one that applies.
* If you change the stop yourself, TTMT stops moving it on that position.
* Changes reach open trades at their next check. A stop already moved stays where it is.
* Turning it off stops further moves. A stop already moved stays where it is.

::: info Example — BUY EURUSD, breakeven at TP1, Previous TP
Entry 1.1000, stop 1.0960 (40 pips, so 1R = 40 pips), buffer 2 pips. TPs at 1.1020, 1.1040, 1.1060 and 1.1080.

| Price reaches | The stop goes to |
|:--|:--|
| TP1 (1.1020) | 1.1002 — breakeven |
| TP2 (1.1040) | 1.1020 — TP1 |
| TP3 (1.1060) | 1.1040 — TP2 |
| TP4 (1.1080) | The last lots close; nothing is left open |

After TP3 the stop is 40 pips past entry: +1R on the positions still open. With 0.10 lots open on a USD account, that is $40.
:::

::: info Example — SELL EURUSD, breakeven at TP1, Previous TP
Entry 1.1000, stop 1.1040, buffer 2 pips. TPs at 1.0980, 1.0960, 1.0940 and 1.0920.

| Price reaches | The stop goes to |
|:--|:--|
| TP1 (1.0980) | 1.0998 — breakeven |
| TP2 (1.0960) | 1.0980 — TP1 |
| TP3 (1.0940) | 1.0960 — TP2 |
| TP4 (1.0920) | The last lots close; nothing is left open |
:::

Other choices on the same BUY trade:

* **2 TPs earlier:** TP1 sets breakeven at 1.1002. At TP2 the stop stays at breakeven. At TP3 it goes to 1.1020 (TP1).
* **Breakeven at TP2, Previous TP:** at TP1 nothing moves. At TP2 the stop goes to 1.1020 (TP1), which protects more than breakeven at 1.1002. At TP3 it goes to 1.1040 (TP2).
* **Auto-Breakeven set to Never, Breakeven once in profit at 15 pips:** breakeven is set at 1.1015, before TP1. At TP1 there is no earlier TP, so the stop stays at 1.1002. At TP2 it goes to 1.1020 (TP1).

### When a move can't be placed

If a move can't be placed, the stop stays where it is and TTMT tries again every few seconds. It never closes a position for this. The trade's timeline shows the move as waiting, for example "Move to TP2 waiting".

### Channel stop moves

While this is on, a channel stop move that would loosen your stop is not applied, and you are told. After breakeven, TTMT ignores the channel's stop moves on those positions, as it does today.

### Runners and trailing

A runner has no TP price, so it never moves the stop. Its trailing stop, if on, still trails; a TP move changes it only when it protects more.

### Where you see it

* In the trade log and on live trades, a trade whose stop sits on a TP shows **Stop at TP2**. Its tooltip reads: "The stop is at TP2 (1.1040), placed by Lock in profit at each TP."
* The trade log's stop column shows the current stop, with the signal's stop below it, for example "at TP2 · signal 1.0960".
* The trade's timeline shows each move, for example "Stop moved to TP1 — Price reached TP2 (1.1040). The stop on 3 position(s) moved to 1.1020 (TP1)."
* Each move also appears in your notification bell, at the Balanced notification level and above.

::: warning What can still go wrong
A price gap past the stop can still close at a worse price.
:::

The buffer means the stop is not moved to exactly your entry price. A 2-pip **Lock in a small profit** buffer parks the stop just past entry so that, if breakeven catches a reversal, the costs are covered and you come out flat or slightly ahead.

***

## The ways breakeven fires

TTMT has six independent ways to trigger a breakeven move. The first two cover the normal case; the others cover edge cases, so your trade is protected even when something goes wrong.

1. **Automatic on TP hit** — the primary path. When your trigger TP fills, breakeven moves the stop on every remaining position in the trade.
2. **Once in profit** — with **Breakeven once in profit** on, breakeven is set when the trade reaches the distance you chose. See [Breakeven once in profit](#breakeven-once-in-profit).
3. **From a channel command** — your provider sends "set BE", "move SL to entry", or similar, and TTMT applies it immediately, even before TP1 is hit.
4. **Retry after a hiccup** — if the broker did not accept the stop change the first time (latency, a requote, a connection blip), TTMT retries on a backoff until it sticks.
5. **Recovery safety net** — if a position closed during a connectivity blip and breakeven had not yet landed, a background check catches up so the trade's record and its protection stay consistent.
6. **Combined close-and-breakeven** — when a channel command asks to both partially close the trade and move to breakeven, TTMT does both in one coordinated action.

::: info Channel commands fire immediately
A "set BE" command from your provider applies straight away, even before your trigger TP is hit. That keeps you aligned with the provider's risk management instead of waiting on your own trigger level.
:::

***

## When breakeven can't be set: the fallback {#when-breakeven-can-t-be-set-the-fallback}

Sometimes the stop cannot move to entry yet. Price is too close to entry for the broker to accept the stop, or a sharp spike has already taken price back past entry. TTMT then does not drop the breakeven. Your **If the stop can't move to entry in time** setting decides what happens:

| Option | What happens when the stop is too close to price | Best for |
|:-------|:-------------|:---------|
| **Keep the stop** | The position keeps its current stop. TTMT checks the price every few seconds and moves the stop to breakeven as soon as price moves far enough from entry. | Keeping the position open; the default. |
| **Step closer** | The same as Keep the stop: the position waits and moves to breakeven when price allows. | The same, plus the 5, 10 and 15-pip stops below for other errors. |
| **Close** | TTMT closes that position at market. The other positions of the trade still move to breakeven. | Never holding a position that could not be protected. |

This applies when a TP triggers breakeven and when your channel sends a breakeven message. While a position waits, the trade shows **Breakeven pending**, and you get one notification. If the trade closes before the stop could move, the trade log shows **BE not set**.

If the broker refuses the stop for a reason that is not about distance, TTMT retries first. If the retries do not succeed, the option runs: Keep the stop leaves the stop, Step closer tries a stop 5, 10, then 15 pips from entry, and Close exits at market.

::: info With Lock in profit at each TP on
With Lock in profit at each TP on, Auto-Breakeven and every stop move wait instead of closing. A channel's "move to breakeven" message, your own Set breakeven, and the checks that catch up on a missed breakeven still follow this choice. They can still close.
:::

::: tip If price is back past entry when a TP hits
This setting covers one more case: a TP hits, but price is already back past your entry. With **Close**, TTMT closes that position instead of waiting. With **Keep the stop**, it waits like the setting above. It applies only when a TP started the breakeven, not to a channel's breakeven message. TTMT closes only when it has read the price; without a price it waits.
:::

You will find this under **Settings › Protect open trades**, in Full view.

***

## Why gold and other instruments get the buffer right

TTMT calculates the breakeven buffer from each symbol's actual price precision, so a 2-pip buffer means the same thing on EURUSD as it does on gold. On gold, a 2-pip buffer is roughly $0.20 of price — wide enough to sit clear of normal gold noise the instant breakeven is set.

***

## What "Breakeven" means in your trade log

A trade shows **Breakeven** in your log only when it closed at no loss *because* the breakeven stop caught a reversal — a trade that would otherwise have closed at a loss, where breakeven was active.

A trade that hit breakeven and then ran on to profit shows as **Won**. Breakeven protected it, but the profit is the real outcome. So "Breakeven" in your log means "protected from a loss," not "broke even on a winner."

::: tip
Seeing Breakeven in your log is a good thing — it means a trade was protected from becoming a loss. Trades that profited after breakeven show as Won.
:::

***

## Trailing stops

A trailing stop complements breakeven. Breakeven moves the stop to entry plus the buffer, and Lock in profit at each TP moves it to TP prices. A trailing stop follows price at a fixed distance as price moves your way. Once the stop passes entry, it locks in gains. It's **off by default**; you enable it under **Settings › Protect open trades** (**Trailing stop**, formerly "Trailing stop on the last TP"). The trailing distance (**Trail by**) is configurable (default 30 pips, range 5–500).

The trailing stop works the same on MetaAPI Cloud and on Self-Host.

### When trailing starts

You choose when it starts: after breakeven, after a TP, after a number of pips in profit, at once, or after an amount of profit. **After breakeven** is the default. It starts on a position when its stop is at breakeven. Set a breakeven level or **Breakeven once in profit**. Without them, only a channel or manual breakeven starts it. The other starts do not need a breakeven level. With the default **Positions** choice, **Last TP only**, trailing moves a [runner](/trade-config/runners): a position left open with no fixed take-profit. That choice needs **Let the last TP run without a target** under **Settings › Take profits**. **Every open position** does not.

### Trailing and breakeven together

It never moves a stop further from price. When breakeven or Lock in profit at each TP would place a better stop, that stop is used.

### How modifications protect your settings

When TTMT moves a stop for breakeven, it keeps the trade's take-profits, and a trailing position keeps trailing.

That cooperation follows two rules:

* A **"set BE"** command on a trailing position moves the stop only if that protects more. The position keeps trailing.
* A **"set explicit SL"** command on a trailing position **cancels trailing** and sets the stop you asked for, because an explicit instruction overrides the automation.

***

## Breakeven with TP Redistribution

Breakeven and [TP Redistribution](/core-concepts/tp-redistribution) work together. When deeper layers fill, your first layer locks to TP1 (on the Most at last TPs strategy, formerly called Extended, its largest order is left out of the lock). When TP1 hits, breakeven fires for the remaining positions. From that point the remaining positions hold both their re-spread targets and a protected stop at entry plus buffer — profit banked early on the first layer, with a safety net under everything still running.

***

## Ideal Settings & Trading Strategy

### Scenario 1 — Capital-preservation beginner

**Setup:** New trader, $5,000 account, one complete-signal channel.

**Settings:**

* Auto-Breakeven: TP1
* Lock in a small profit: 2 pips (default, covers costs)
* Follow 'move to breakeven' messages: on
* If the stop can't move to entry in time: Close

**Why:** Triggering at TP1 secures the trade as early as possible, and the **Close** fallback exits at market if the move fails on an error that will not clear. A stop too close to price in a fast move is not closed; the trade keeps its current stop. Maximum safety, minimal give-back.

**Watch for:** Going risk-free at TP1 can stop you out at entry on normal pullbacks, before the trade reaches deeper targets.

**Switch when:** You want trades to breathe before going risk-free — move to Scenario 2.

### Scenario 2 — Balanced swing trader

**Setup:** Experienced trader, $25,000 account, lets trades run for multiple TPs.

**Settings:**

* Auto-Breakeven: TP2
* Lock in a small profit: 2 pips (default)
* Follow 'move to breakeven' messages: on
* If the stop can't move to entry in time: Step closer
* Trailing stop: on, starts after breakeven

**Why:** Triggering at TP2 gives the move room to develop before locking risk-free. Once breakeven is in, a trailing stop captures more profit on a continued run, and **Step closer** tries a stop 5, 10, then 15 pips from entry if the move fails on an error that will not clear.

**Watch for:** Waiting until TP2 means a reversal between TP1 and TP2 can still hit your original stop — you are risking the early gain for more room.

**Switch when:** A channel turns fast or scalp-style — move to Scenario 1 and trigger earlier.

### Scenario 3 — Prop-firm drawdown discipline

**Setup:** $100,000 prop-challenge account, strict daily-loss rule.

**Settings:**

* Auto-Breakeven: TP1 (bank protection early)
* Follow 'move to breakeven' messages: on
* If the stop can't move to entry in time: Close (exit at market if the move fails on an error that will not clear)
* Trailing stop: optional, conservative distance

**Why:** Prop rules punish drawdown, so locking trades risk-free at the first target — and closing if the move fails on an error that will not clear — keeps your exposure tightly bounded.

**Watch for:** Early breakeven plus aggressive trailing can stop you out of trades that would have run. Accept smaller, safer wins to protect the challenge.

**Switch when:** You pass to a funded account with looser rules — loosen toward Scenario 2.

***

## Related pages

* [TP Redistribution](/core-concepts/tp-redistribution) — how open orders are re-split across your targets as layers fill, and how breakeven interacts
* [Order Execution](/core-concepts/order-execution) — the layered grid breakeven protects
* [Risk Management](/core-concepts/risk-management) — sizing and the stops breakeven moves
* [Active Trade Setup](/trade-config/active-trade-setup) — the settings screen for breakeven, trailing, and fallback
* [Position Protection](/safety-and-reliability/position-protection) — the broader protection guarantees
