---
url: /core-concepts/order-management.md
description: >-
  The deep reference for a TTMT trade's full life — volume sizing, how layers
  become orders, entry zones, target assignment, fills, target re-spreading,
  close actions, and end reasons.
---

# Order Management

This is the complete reference for how a TTMT trade lives, from the moment a signal is accepted to the moment its last position closes. Where [Order Execution](/core-concepts/order-execution) is the strategy guide, this page is the mechanics: exactly how your volume is sized, how your layers become priced orders, how targets are assigned and then shifted as layers fill, and how a trade finally ends. Read it when you want the full numbers behind a trade.

::: info
This page is the mechanics. For *which* settings to pick and why, see [Order Execution](/core-concepts/order-execution).
:::

***

## 1. Trade lifecycle overview

Every trade moves through these stages:

```mermaid
flowchart TD
    A["Signal accepted"] --> B["Volume sized"]
    B --> C["Order grid built & priced"]
    C --> D["Orders placed"]
    D --> E["Fills monitored"]
    E --> F{"A layer fills?"}
    F -->|Yes| G["Targets re-spread"]
    F -->|No| E
    G --> H["Positions close at targets / stop / breakeven"]
    H --> I["Trade record finalized"]
```

| Stage | What happens |
|:------|:-------------|
| **Signal accepted** | TTMT has read a valid signal (symbol, direction, stop-loss, targets). |
| **Volume sized** | Total lot size is set from your risk settings ([Section 2](#_2-volume-calculation)). |
| **Order grid built** | Volume is split across your layers and priced in the entry zone ([Sections 3–4](#_3-layers-and-the-orders-they-become)). |
| **Targets assigned** | Each order is mapped to a take-profit level ([Section 5](#_5-take-profit-assignment)). |
| **Orders placed** | Orders go to your broker independently ([Section 6](#_6-order-placement)). |
| **Fills monitored** | TTMT tracks which layers fill ([Section 7](#_7-fill-monitoring)). |
| **Targets re-spread** | As deeper layers fill, the held positions' targets are re-spread to your TP strategy ([Section 8](#_8-adaptive-tp-redistribution)). |
| **Trade finalized** | Positions close at their targets, stop, or breakeven; the trade gets an end reason and the record is saved ([Section 9](#_9-closing-a-trade-actions-and-end-reasons)). |

***

## 2. Volume calculation

Before any orders are placed, TTMT decides how large the total position should be. You pick one of three sizing modes in **Settings › Size per trade** (the card is called **How to size each trade**): **Fixed lots**, **% of balance** or **Fixed amount**. Section 2.1 covers Fixed lots; the other two are explained under [Position sizing](/core-concepts/risk-management#position-sizing).

### 2.1 Fixed lots

You set a static lot size (for example, `0.10` lots) in the **Lot size** row and every trade uses that volume as its total, regardless of stop-loss distance or balance.

| Advantage | Disadvantage |
|:----------|:-------------|
| Predictable and simple — you know the position size before it opens. | Risk swings between trades — a 100-pip stop risks 10× more than a 10-pip stop on the same lot. |

The lot you set is the *total* for the trade; [Section 3](#_3-layers-and-the-orders-they-become) splits it across your layers.

### 2.2 Choosing a lot that matches a percentage of balance

If you want your size to follow your balance, use **% of balance** (the **Risk per signal** row) instead of a fixed lot — TTMT then recomputes the lot on every trade from the signal's stop distance, converting the symbol's currency into your account's where they differ. **Fixed amount** (the **Amount per signal** row) does the same with a money amount instead of a percentage. See [Position sizing](/core-concepts/risk-management#position-sizing). The rest of this section is about **Fixed lots**, where the percentage is something *you* reason about when picking the lot rather than a setting the platform applies: a common approach is to size the lot so a typical stop-loss costs roughly 1–2% of your balance, then adjust the number by hand as your balance changes.

```
Pick your lot = Risk Budget / (Weighted SL Distance x Contract Size)

  Risk Budget   = Account Balance x (Target Risk % / 100)
  Contract Size = From the broker symbol spec (e.g. 100,000 for forex, 100 for gold)
```

#### Why "weighted" stop-loss distance?

Because the grid enters at different prices across the entry zone, each layer is a different distance from the stop. When you plan a lot against a target risk %, use a **weighted average** that reflects the true aggregate risk rather than assuming every order sits at market:

```
Layer 1: Market price          -> Full SL distance
Layer 2: 33% into entry zone   -> Reduced SL distance
Layer 3: 66% into entry zone   -> Further reduced
Layer 4: Entry zone edge       -> Minimal SL distance

Weighted SL = sum of (layer volume share x layer SL distance)
```

Because deeper layers enter at a better price, the average risk per lot is lower — so a given fixed lot risks slightly less than a naive single-order estimate suggests.

::: info Example — picking the lot
**Account:** $5,000 | **Target:** 2% ($100) | **Stop:** 60 pips on XAUUSD ($6.00)

```
Risk Budget   = $5,000 x 2% = $100
Contract Size = 100 (gold)
Simple SL     = 6.00 price units
Weighted SL   = 3.79 (Even, 4 layers, default zone)
Fixed lot     = $100 / (3.79 x 100) = 0.26 lots
```

Set 0.26 lots and a 60-pip gold stop costs about $100. On gold one pip is $0.10, so 60 pips is $6.00. The lot is then fixed — re-run the math when your balance shifts.
:::

### 2.3 Per-asset default stops and targets

When a signal is missing a stop or targets, TTMT fills them in from defaults you can set per asset class — Forex Major, Forex Minor, Metals, Indices, Crypto and Energies — or for a single instrument, under **Settings › Symbol exceptions**. These are a fallback only for that asset class; they are not a separate settings layer that overrides a signal that already has those values. See [Per-Asset Overrides](/trade-config/per-asset-overrides).

### 2.4 The total-volume safety ceiling

Whatever your sizing math produces, TTMT clamps the total size of any single trade to a platform safety ceiling. This is a backstop, not a setting you configure — there is no risk-level selector that raises it, though higher internal ceilings can exist for special accounts.

The ceiling is absolute — if your sizing inputs would produce an implausibly large position, it is reduced before any order is placed.

::: info Safety-ceiling example
A mis-sized input on a large balance with a tight stop would produce a wildly oversized position. The platform ceiling clamps it back down — the extra volume is never placed.
:::

***

## 3. Layers and the orders they become

Once total volume is known, it is split across your chosen **Entry layers** (1–6, default 4). The number of individual orders inside each layer is **not** something you set — TTMT derives it from the volume that lands in the layer and your broker's minimum lot and lot step, capping each layer at **6 orders** and the whole trade at **36 orders**. More volume in a layer means more orders; too little for even one order and the layer is skipped.

::: tip
The default 4 layers is a solid choice. Raising the layer count gives each layer a smaller slice of your volume, so at small lots some of the resulting orders may be too small to place and get skipped. The viability indicator in Trade Preview shows how many orders will actually go out at your lot size.
:::

### 3.1 Grid architecture

* **Layer 1** fires first — a market order when price is already favorable.
* **Deeper layers** are limit orders waiting at retracement prices in the entry zone.

```mermaid
block-beta
    columns 4

    block:layer1:4
        columns 4
        l1["Layer 1 — Market"]
        l1a["L1a"]
        l1b["L1b"]
        l1c["L1c"]
    end

    block:layer2:4
        columns 4
        l2["Layer 2 — Limit @ 66%"]
        l2a["L2a"]
        l2b["L2b"]
        l2c["L2c"]
    end

    block:layer3:4
        columns 4
        l3["Layer 3 — Limit @ 33%"]
        l3a["L3a"]
        l3b["L3b"]
        l3c["L3c"]
    end

    block:layer4:4
        columns 4
        l4["Layer 4 — Limit @ edge"]
        l4a["L4a"]
        l4b["L4b"]
        l4c["L4c"]
    end

    style l1 fill:#0d4f3c,stroke:#36d399,color:#d6fff0
    style l2 fill:#023e8a,stroke:#0096c7,color:#e6f6ff
    style l3 fill:#023e8a,stroke:#0096c7,color:#e6f6ff
    style l4 fill:#03045e,stroke:#48cae4,stroke-width:2px,color:#caf0f8
```

The diagram shows the default 4-layer shape with three orders per layer as an illustration — the real order count per layer is derived from your lot size and broker rules (up to 6 per layer, 36 total). The volume each layer carries is set by the entry strategy below.

### 3.2 Entry strategies (volume distribution)

The entry strategy controls how total volume is spread across layers. You pick it in **Settings › Entries** (the row is called **How the size is split across layers**). The four strategies, with their default 4-layer shares:

| Strategy (as shown in Settings) | L1 | L2 | L3 | L4 |
|:---------|:--:|:--:|:--:|:--:|
| **All at once** (called Single in the API) | 100% | — | — | — |
| **Even** *(default)* | 25% | 25% | 25% | 25% |
| **More at first** (Front-Loaded) | 31% | 23% | 23% | 23% |
| **More deeper** (Martingale) | 10% | 20% | 30% | 40% |

These shares scale to whatever layer count you choose — Even at 3 layers is about 34/33/33, for example. For guidance on which strategy to pick, see [Order Execution](/core-concepts/order-execution); this page doesn't repeat the comparison charts.

### 3.3 Volume rounding and minimum lots

Brokers enforce a minimum lot size (typically `0.01`) and a lot step (typically `0.01`). After sizing each order, TTMT rounds to the step. To avoid cumulative rounding loss, it allocates the exact remainder to the last order so the total still matches.

If an order's volume falls below the broker minimum, it is **skipped** rather than forced up to the minimum — this prevents accidental over-leverage. The trade continues with whatever orders are viable, and the UI's viability indicator shows how many orders will actually execute at your lot size.

::: info Volume-skip example
At a small lot size and 6 layers, TTMT may try to split your volume into dozens of tiny orders, several of which fall below the broker minimum. Those are skipped — the viability indicator might read 22 of the orders it wanted to place. To place more of them, raise your lot size or lower the layer count.
:::

***

## 4. The entry zone

The entry zone is the price band across which the limit-order layers are spread.

### 4.1 Zone calculation

You set the zone in **Settings › Entries** (Full view), in the **Entry zone width** row. Two modes are available:

**% of the stop — default:**

```
Zone Size = (SL Distance - 5 pips) x (Entry zone % / 100)

Default: 80%, range 20-100%
```

The zone is measured on the *usable* stop distance, which is the stop distance minus a 5-pip buffer, so the deepest layer never sits right on the stop.

**Fixed pips:**

```
Zone Size = Entry zone pips x Pip Value
```

A fixed zone that would reach past the stop is shortened to end 5 pips before it. See [How Your Entry Zone Is Decided](/core-concepts/entry-zone-resolution).

### 4.2 Layer entry prices

For a **BUY**:

```
Layer 1: Market price (immediate execution)
Layer 2: Entry Price - (Zone Size x 34%)    [66% from the bottom]
Layer 3: Entry Price - (Zone Size x 67%)    [33% from the bottom]
Layer 4: Entry Price - Zone Size             [zone edge — best price]
```

For a **SELL**, the band is mirrored above entry.

::: info Example — Buy EURUSD (default 4-layer grid)
**Entry:** 1.1000 | **Stop:** 1.0980 (20 pips) | **Zone:** 12 pips (80% of the 15 usable pips)

| Layer | Entry price | Distance from market |
|:-----:|:-----------:|:--------------------:|
| L1 | 1.1000 | 0 pips (market) |
| L2 | 1.0996 | 4 pips |
| L3 | 1.0992 | 8 pips |
| L4 | 1.0988 | 12 pips |
:::

### 4.3 How your effective zone is decided

The zone above is the default case. The band your trade actually enters across depends on your override settings and the signal itself — single-layer trades use no zone, an override can fix the zone or let it be recomputed, and a signal's own zone can pass through unchanged. See [How Your Entry Zone Is Decided](/core-concepts/entry-zone-resolution) for the five possible outcomes, and [Entry Zone Expansion](/core-concepts/entry-zone-expansion) for widening the zone toward your targets to catch near-misses.

***

## 5. Take-profit assignment

Each order in the grid is assigned to a take-profit level (TP1–TP6) based on the TP strategy you chose in **Settings › Take profits** (the row is called **How profit is taken**). This sets where each piece of your position closes.

### 5.1 TP strategies

TTMT supports up to 6 take-profit levels. The TP strategy controls what share of total volume exits at each. The names in Settings are **Most at first TPs** (Progressive), **Equal** (Balanced) and **Most at last TPs** (Extended):

| TP Count | Progressive (Most at first TPs) | Balanced (Equal) | Extended (Most at last TPs) |
|:--------:|:-----------:|:--------:|:--------:|
| **1 TP** | 100% | 100% | 100% |
| **2 TPs** | 60 / 40 | 50 / 50 | 40 / 60 |
| **3 TPs** | 50 / 30 / 20 | 34 / 33 / 33 | 20 / 30 / 50 |
| **4 TPs** | 40 / 25 / 20 / 15 | 25 / 25 / 25 / 25 | 15 / 20 / 25 / 40 |
| **5 TPs** | 35 / 25 / 18 / 13 / 9 | 20 / 20 / 20 / 20 / 20 | 9 / 13 / 18 / 25 / 35 |
| **6 TPs** | 30 / 23 / 18 / 13 / 10 / 6 | 17 / 17 / 17 / 17 / 16 / 16 | 6 / 10 / 13 / 18 / 23 / 30 |

**Most at first TPs** front-loads exits to lock in profit early. **Equal** spreads volume roughly evenly. **Most at last TPs** holds the most volume for the furthest targets. See [Order Execution](/core-concepts/order-execution) for when to use each.

### 5.2 TP assignment logic

TTMT assigns each order to the take-profit level that needs the most volume to reach its target share:

1. Sort orders by volume (largest first).
2. For each order, find the target level with the largest remaining deficit.
3. Assign the order to that level and update its running total.

Strategy affects the tie-break: **Most at first TPs** prefers earlier targets when two are close (secure profit), **Most at last TPs** prefers later targets (chase trends), and **Equal** processes orders in natural layer order.

### 5.3 Dynamic TP count

If a signal has fewer than 6 targets, the assignment adapts automatically and spreads all orders across the available levels using that level count's shares — a 3-target signal uses the 3-TP row.

***

## 6. Order placement

### 6.1 Parallel placement

Orders are placed and managed independently — none waits on another, and if some fail the rest still go through. To avoid overwhelming the broker, limit orders are staged in small batches with a brief delay between batches.

```mermaid
flowchart LR
    subgraph "Independent placement"
        direction TB
        M1["L1a Market"] ~~~ M2["L1b Market"] ~~~ M3["L1c Market"]
        L1["L2a Limit"] ~~~ L2["L2b Limit"] ~~~ L3["L2c Limit"]
        L4["L3a Limit"] ~~~ L5["L3b Limit"] ~~~ L6["L3c Limit"]
        L7["L4a Limit"] ~~~ L8["L4b Limit"] ~~~ L9["L4c Limit"]
    end
```

### 6.2 Layer 1 (market)

Layer 1 fills immediately at market: TTMT submits the order, confirms the entry price from the broker, and records the new position.

### 6.3 Deeper layers (limit)

Deeper layers place limit orders at their calculated prices. They stay pending on the broker until price reaches them and they fill, the trade is closed, or you cancel them. When a limit fills, TTMT records the new position.

### 6.4 Partial execution

If some orders fail (a network hiccup or a broker reject), the trade continues with whatever succeeded. The one hard-failure condition is **no market order succeeding** — in that case the trade is aborted.

### 6.5 Finalizing the trade record

After all orders settle, the orders, positions, and the trade record are saved together in a single step, so no partial data is left behind if something fails.

***

## 7. Fill monitoring

Once the trade is live, TTMT watches every position:

* **Fill detection** — when a limit order fills.
* **Layer tracking** — how many distinct layers now hold open positions.
* **Target and stop detection** — when a position closes at its target or stop.

When a new layer fills, TTMT increments the filled-layer count and re-spreads the targets ([Section 8](#_8-adaptive-tp-redistribution)).

***

## 8. Adaptive TP Redistribution

At entry, TTMT spreads the trade's orders across your targets to match your TP strategy, planned for the whole trade. When deeper layers fill, TTMT re-spreads the targets of the positions you actually hold so they match your TP strategy again, and locks Layer 1 to TP1 as a safety net. This is the Redistribution feature; [TP Redistribution](/core-concepts/tp-redistribution) has the full treatment with worked tables.

### 8.1 Why re-spread

Deeper layers only fill if price retraces, so the part of the trade you hold is often only some of its orders, and their targets no longer add up to the split you chose. Without a re-spread, a trade where Layer 1 and 2 filled could hold most of its volume on TP1 and none on the far target, or the other way round.

### 8.2 How the re-spread works

* **Only Layer 1 filled:** nothing changes; every order keeps its entry target.
* **A deeper layer fills:** TTMT takes the filled positions, Layer 1 first and then largest first, and gives each one to the target that is furthest below its share in your TP strategy, measured on the volume you hold.
* **Orders still waiting** keep their entry targets until they fill.

Two rules sit on top:

* **Layer 1 lock.** When any deeper layer fills, the Layer 1 positions move to **TP1** to secure early profit. On the **Most at last TPs** strategy the largest Layer 1 position is exempt and stays a far-target runner. On by default; it can be turned off ([Section 8.6](#_8-6-layer-1-lock-toggle)).
* **No ranking by layer.** The re-spread follows your TP strategy, not your layer order: a deeper entry is not guaranteed a further target, and a re-spread can put a position on a further TP level as well as a nearer one. TP prices themselves never move. There is currently no setting to choose the take-profit per layer.

### 8.3 Example

4 layers with 2 equal orders each, 3 targets, Most at first TPs (50 / 30 / 20), Layers 1 and 2 filled:

| Order | At entry | After the re-spread |
|:-----:|:--------:|:-------------------:|
| L1a | TP1 | **TP1** (locked) |
| L1b | TP1 | **TP1** (locked) |
| L2a | TP2 | TP2 |
| L2b | TP1 | **TP3** |

The four held orders go from 75% on TP1 to 50 / 25 / 25. When all four layers fill, the re-spread lands back on the entry assignments, because you then hold the whole trade.

### 8.4 Triggers

| Trigger | When | Behavior |
|:--------|:-----|:---------|
| **Layer fill** | A new limit order fills | Full re-spread of the filled positions |
| **Followup changes target count** | A followup adds or removes targets | Re-assign with the new count |
| **Followup updates target prices** | A followup moves the target prices only | Update prices without changing assignments |
| **All layers filled** | Every layer confirms filled | Full re-spread at maximum layer count |

With **TP Redistribution** switched off, nothing is re-spread: positions keep their entry targets and followups only update prices.

### 8.5 Safety mechanisms

When several layers fill in quick succession, TTMT handles the fills one at a time, always using the latest data, so an outdated re-spread can't be applied. If some target changes fail, TTMT continues where it can and queues the rest for automatic retry with increasing wait times.

### 8.6 Layer 1 lock toggle

The Layer 1 lock is **on by default**, under **Settings › Protect open trades**, in Full view (**Keep layer 1 on TP1 when that happens**, shown while **Move TPs closer when deeper layers fill** is on). With it on, Layer 1 pins to TP1 once any deeper layer fills, flooring your risk on the earliest entry; on Most at last TPs the largest Layer 1 position is left out. Turn it off and Layer 1 is re-spread like every other position. See [TP Redistribution](/core-concepts/tp-redistribution) for the full treatment.

::: info Layer 1 lock example
All four layers fill. With the lock **on**, the Layer 1 orders bank at TP1 as a safety net. With the lock **off**, they take whatever targets the re-spread gives them: more upside if the move continues, but no floored profit on the earliest entry.
:::

***

## 9. Closing a trade: actions and end reasons

A trade doesn't just "end" — it ends *because* of something, and your Trade Log records both **where it landed** (its status) and **why** (its end reason). Understanding the difference tells you at a glance whether a trade did what you wanted.

### Close actions available to you

While a trade is live, you can act on it from the dashboard:

| Action | What it does |
|:---|:---|
| **Close a position** | Closes one filled leg of the trade at market. |
| **Close the whole trade** | Closes every open position on the trade at once. |
| **Cancel an order** | Removes a still-waiting limit order so it can't fill later. |
| **Move to breakeven** | Pulls the stop to entry plus your buffer (see [Breakeven Management](/core-concepts/breakeven-management)). |

Your channel can also send close and modify follow-ups ("close half", "close all", "move SL to entry"), which TTMT applies to the matching open trade.

### Orphan-order cancellation

When a trade's stop-loss is hit, any of its limit orders that are still waiting are now **orphans** — they belong to a trade you're already out of. With **Cancel waiting orders when the stop is hit** on (the default; **Settings › Stop loss**, Full view), TTMT cancels those waiting orders so a late fill can't quietly re-open a position on a trade that already stopped out. Leave it on unless you have a specific reason to let leftover limits linger.

### How a trade ends — the end reasons

Every finished trade carries an end reason. These are the ones you'll see:

| End reason | What it means |
|:---|:---|
| **Won** / **Lost** | The trade closed in profit / in loss. |
| **Not Filled** | Orders were placed but none filled — no money was ever at risk. |
| **Rejected** | The broker refused the order (invalid stops, market closed, symbol disabled). |
| **Closed by Channel** | A close or exit signal from your channel ended the trade. |
| **Canceled by You** | You closed or canceled it manually. |
| **Loss limit** / **Profit target** | Your [per-trade P\&L cap](/core-concepts/risk-management) closed the trade — sign-aware, so a loss reads *Loss limit* and a profit reads *Profit target*. |
| **Stopped Out** | Your broker liquidated the position for insufficient margin. This is a **margin liquidation, not your strategy stop-loss** — it means the account ran out of margin, which is a different (and worse) event than a normal SL hit. |
| **No Follow-Up** | An alert never received its follow-up details in time. |
| **Under Review** | The trade needs a closer look — the log flags it for you. |
| **Risk Limit Hit** | Your account's [daily loss or profit limit](/core-concepts/risk-management) ended the trade. |
| **Profile day limit** | The daily limit set on the preset a channel uses ended the trade. |
| **Subscription ended** | The trade was closed because the subscription ended. |

::: warning "Stopped Out" is not your stop-loss
A trade marked **Stopped Out** was force-closed by your broker because the account lacked the margin to hold it — not because price reached your stop-loss level. If you see this, your position sizing or open exposure is too large for the account. It is a sign to reduce size, not a normal exit.
:::

***

## 10. How Trade Preview mirrors this

The dashboard's [Trade Preview](/trade-config/trade-preview) runs the same calculation as a live trade — volume sizing, the layers, the zone, target assignment, and the fill scenarios. What you see in Preview is what you'll get.

::: tip
Preview uses the same calculation as a live trade — confirm your sizing and layers there before changing settings.
:::

In Settings the preview docks beside the settings. A **Preview as** control picks which signal it simulates, and you can switch between **Full signal** and **Alert only**. It has two tabs:

* **The trade** — the full order table with individual prices, volumes, and target assignments, plus risk metrics (max loss, risk/reward, average entry) and a viability check showing how many orders will execute.
* **What if…** — simulates partial fills (1 layer up to all layers) and shows how the targets are re-spread, which orders change and by how much, and a breakeven simulation for when a target triggers the [breakeven automation](/core-concepts/breakeven-management).

***

## 11. Worked example — full walkthrough

A complete trade from signal to target re-spread, with concrete numbers.

### Setup

| Parameter | Value |
|:----------|:------|
| Account balance | $10,000 |
| Sizing | % of balance, **Risk per signal** 2% |
| Symbol | XAUUSD (gold) |
| Direction | BUY |
| Entry | 2,850.00 |
| Stop-loss | 2,844.00 (60 pips / $6.00) |
| TP1 / TP2 / TP3 | 2,853.00 / 2,856.00 / 2,860.00 |
| Entry strategy | Even (25/25/25/25) |
| TP strategy | **Most at first TPs** |
| Entry zone width | 80% of the stop, minus the 5-pip buffer ($0.50) = 44 pips = $4.40 |

### Step 1 — volume

```
Risk Amount   = $10,000 x 2% = $200
Contract Size = 100
SL Distance   = $6.00

Weighted SL (Even):
  Layer 1: 25% x $6.00                  = $1.50
  Layer 2: 25% x ($6.00 - $4.40 x 0.34) = $1.13
  Layer 3: 25% x ($6.00 - $4.40 x 0.67) = $0.76
  Layer 4: 25% x ($6.00 - $4.40 x 1.00) = $0.40
  Weighted Total = $3.79

Total Volume = $200 / ($3.79 x 100) = 0.53 lots
```

### Step 2 — entry prices

```
Usable stop = $6.00 - $0.50 = $5.50
Zone Size   = 80% x $5.50 = $4.40

Layer 1: 2,850.00 (Market)
Layer 2: 2,850.00 - ($4.40 x 0.34) = 2,848.50
Layer 3: 2,850.00 - ($4.40 x 0.67) = 2,847.05
Layer 4: 2,850.00 - $4.40          = 2,845.60
```

### Step 3 — volume and target assignment

Even splits the 0.53 lots across the layers (0.14 / 0.13 / 0.13 / 0.13), then within each layer order "a" is largest. Targets are assigned by the [Section 5.2](#_5-2-tp-assignment-logic) rule — orders sorted by volume, each assigned to the target with the largest remaining deficit, ties going to the earlier target (Most at first TPs).

| Order | Volume | Target | Entry price |
|:-----:|:------:|:------:|:-----------:|
| L1a | 0.06 | TP1 | 2,850.00 |
| L1b | 0.04 | TP3 | 2,850.00 |
| L1c | 0.04 | TP2 | 2,850.00 |
| L2a | 0.06 | TP1 | 2,848.50 |
| L2b | 0.04 | TP1 | 2,848.50 |
| L2c | 0.03 | TP1 | 2,848.50 |
| L3a | 0.06 | TP2 | 2,847.05 |
| L3b | 0.04 | TP3 | 2,847.05 |
| L3c | 0.03 | TP3 | 2,847.05 |
| L4a | 0.06 | TP1 | 2,845.60 |
| L4b | 0.04 | TP2 | 2,845.60 |
| L4c | 0.03 | TP2 | 2,845.60 |
| **Total** | **0.53** | | |

This lands at roughly TP1 47% / TP2 32% / TP3 21% of volume — close to Most at first TPs's 50/30/20 target, with the small difference coming from broker lot rounding.

### Step 4 — all 4 layers fill

Price drops to 2,845.60, filling every layer. Total exposure 0.53 lots. The filled positions are re-spread to Most at first TPs's 50 / 30 / 20, with Layer 1 locked to TP1:

| Order | At entry | After the re-spread | Price |
|:-----:|:--------:|:-------------------:|:-----:|
| L1a | TP1 | **TP1** (locked) | 2,853.00 |
| L1b | TP3 | **TP1** (locked) | 2,853.00 |
| L1c | TP2 | **TP1** (locked) | 2,853.00 |
| L2a | TP1 | **TP2** | 2,856.00 |
| L2b | TP1 | **TP2** | 2,856.00 |
| L2c | TP1 | **TP3** | 2,860.00 |
| L3a | TP2 | **TP1** | 2,853.00 |
| L3b | TP3 | **TP1** | 2,853.00 |
| L3c | TP3 | **TP1** | 2,853.00 |
| L4a | TP1 | **TP3** | 2,860.00 |
| L4b | TP2 | TP2 | 2,856.00 |
| L4c | TP2 | TP2 | 2,856.00 |

**Volume at each target after the re-spread:**

| Target | Price | Volume | % of total |
|:------:|:-----:|:------:|:----------:|
| TP1 | 2,853.00 | 0.27 | 51% |
| TP2 | 2,856.00 | 0.17 | 32% |
| TP3 | 2,860.00 | 0.09 | 17% |

**Average entry:** about 2,847.79 across all four layers — better than the signal's 2,850.00 because Layer 4 entered at 2,845.60. The Layer 1 lock moved all three Layer 1 orders to TP1, and the re-spread placed the rest so the whole position still follows Most at first TPs's shape. Note that the far target ended up on orders from Layers 2 and 4 here, but that comes from order sizes and order, not from a rule that deeper layers run further.

***

## 12. Key design principles

| Principle | How it works |
|:----------|:-------------|
| **Never trust signal volume** | Volumes come from your settings, never from the signal. |
| **Independent placement** | Each order runs on its own — one failing doesn't stop the rest. |
| **Strategy-shaped targets** | As layers fill, the positions you hold are re-spread to your TP strategy, for any layer and target count (1–6). |
| **Layer 1 safety net** | Layer 1 locks to TP1 once a deeper layer fills (when the lock is on; on Most at last TPs its largest position stays a runner). |
| **Graceful degradation** | If volume is too small for every order, the small ones are skipped, not forced. |
| **Reliable saving** | The whole trade record is saved in one step so nothing is left half-written. |
| **Automatic recovery** | Failed target changes are retried automatically with increasing wait times. |

***

## Ideal Settings & Trading Strategy

[Order Execution](/core-concepts/order-execution) covers how to set up *entries* — layer count, entry strategy, TP strategy. This section is about the *management* choices that decide how a live trade winds down: which positions close first on a partial exit, whether Layer 1 locks to TP1, how hard targets shift on a deep retracement, and what happens to unfilled limit orders when the stop hits. All three scenarios use Fixed lots sizing; pick the lot from the [Section 2.2](#_2-2-choosing-a-lot-that-matches-a-percentage-of-balance) math.

### Scenario 1 — Conservative capital protection

**Setup:** A cautious trader who wants profit banked early and exposure cleaned up the moment a stop hits.

**Settings:**

* Sizing: Fixed lots, sized so a typical stop costs ~1% of balance
* Layers: 3 (shallower grid, less deep exposure)
* **Move TPs closer when deeper layers fill:** on, with **Keep layer 1 on TP1 when that happens** on (Layer 1 pins to TP1 once any deeper layer fills)
* **Which positions a partial close takes** (**Settings › Channel updates**, Full view): **Worst first** (the default)
* **Cancel waiting orders when the stop is hit:** on

**Why:** The layer 1 lock floors profit on the first entry as soon as the trade retraces into a deeper layer, and Worst first closes your losing legs first on a partial exit so realized losses come off the book early. Cancelling waiting orders on a stop means a leftover limit order can't quietly re-enter a trade you're already out of.

**Watch for:** With layer 1 locked, your earliest entry banks at TP1 even when a move has much further to run — you cap that leg's upside in exchange for safety.

**Switch when:** You're consistently green and want the first layer to ride further — Scenario 2.

### Scenario 2 — Balanced let-it-run

**Setup:** An experienced trader who wants early entries to participate in extended moves, not bank at the first target.

**Settings:**

* Sizing: Fixed lots, sized to ~1–2% per typical stop
* Layers: 4 (the default grid)
* **Move TPs closer when deeper layers fill:** on, with **Keep layer 1 on TP1 when that happens** off (Layer 1 is re-spread like every other position instead of pinning to TP1)
* **Which positions a partial close takes:** **A bit of each** (each closing event trims every leg evenly)
* **Cancel waiting orders when the stop is hit:** on

**Why:** Turning the layer 1 lock off lets the first layer take its share of the later targets in the re-spread, so a strong trend keeps your earliest entry working toward later targets. A bit of each keeps the position's shape intact as it winds down, rather than dumping the worst legs first.

**Watch for:** Without the layer 1 lock, a trade that fills deep and then reverses gives back more on the first layer than a locked setup would — you trade floored profit for extension.

**Switch when:** You move to a funded prop account where preserving a single runner matters more than smoothing the close — Scenario 3.

### Scenario 3 — Prop-firm runner discipline

**Setup:** A funded prop trader who wants most of the position off quickly to respect daily-loss rules, while a small share still runs for a far target.

**Settings:**

* Sizing: Fixed lots, sized well inside the firm's per-trade dollar limit
* Layers: 5–6 (more granular grid, so the re-spread can match the strategy closely)
* TP strategy: **Most at first TPs** (most of the held volume on the near targets)
* **Move TPs closer when deeper layers fill:** on, with **Keep layer 1 on TP1 when that happens** on
* **Which positions a partial close takes:** **Worst first** (clears losing legs first to protect the daily-loss budget)
* **Cancel waiting orders when the stop is hit:** on

**Why:** Most at first TPs plus the re-spread keeps most of whatever you hold on the near targets however deep the retracement went, so realized profit lands fast — what a daily-loss rule rewards — while a small share stays on the far target. Worst first protects the firm's loss budget by realizing losers first.

**Watch for:** Layered entries fill more on deep retracements — your worst-case exposure is the deepest fill, not the market layer. Size the fixed lot to that deepest fill, and remember the platform safety ceiling is the absolute backstop, not a substitute for sizing.

**Switch when:** You move to a personal account with looser rules and want early entries to run — Scenario 2.

***

## Related pages

* [Order Execution](/core-concepts/order-execution) — the strategy guide (which settings to pick and why).
* [TP Redistribution](/core-concepts/tp-redistribution) — the target re-spread in depth.
* [How Your Entry Zone Is Decided](/core-concepts/entry-zone-resolution) — how the effective zone is set.
* [Entry Zone Expansion](/core-concepts/entry-zone-expansion) — widening the zone to catch near-misses.
* [Risk Management](/core-concepts/risk-management) — sizing overview and the total-volume safety ceiling.
* [Breakeven Management](/core-concepts/breakeven-management) — stop protection after a target.
* [Trade Preview](/trade-config/trade-preview) — preview the full trade before committing.
* [Trade Log](/dashboard/trade-log) — where a finished trade's status and end reason appear.
