---
url: /core-concepts/risk-management.md
description: >-
  How TTMT protects your capital — sizing that ignores signal lot sizes, the
  total-volume safety ceiling, stop-loss safety checks, the per-trade P&L cap,
  the concurrent kill switch, and advisory drawdown guidance.
---

# Risk Management

Automated trading hands a machine access to your money, so capital protection is built into every trade before a single order goes out. TTMT never uses the lot size a signal posts — it sizes every trade from your own settings — and it refuses prices that would put you at obvious risk. This page covers position sizing, the hard caps you can't exceed, the stop-loss safety checks, and the drawdown guidance that nudges you when a day goes badly.

## Never trust signal volume

This is the most important safety rule on the platform. TTMT **never** uses the lot size from a signal provider's message. Every trade's volume is calculated fresh from your own configured sizing settings.

A provider might say "Buy 5.0 lots GOLD" — TTMT ignores the "5.0 lots" entirely and works out the right volume from your account balance, your risk setting, and the stop-loss distance. If your settings put the correct size at 0.05 lots, that's what trades. The 5.0 lots a careless provider posted, which could be a hundred times your intended size, never touches your account.

## Position sizing

TTMT sizes every trade from your own settings, in **Settings › Size per trade**. You pick one of three modes (the card is called **How to size each trade**), and whichever you choose, the number you set is the *total* for the trade — TTMT splits it across your entry layers (see [Order Execution](/core-concepts/order-execution)), it doesn't open a fresh position per layer.

| Mode | You set | TTMT sizes so that… |
|:---|:---|:---|
| **Fixed lots** | A static lot size in the **Lot size** row (e.g. 0.10) | every trade is exactly that size — dollar risk moves with the stop distance |
| **% of balance** | A share of your balance to risk in the **Risk per signal** row (e.g. 1%) | a stop-out costs about that share — the lot moves with the stop distance so the risk doesn't |
| **Fixed amount** | An amount of money to risk in the **Amount per signal** row (e.g. 200) | a stop-out costs about that amount — the lot moves with the stop distance, and your balance plays no part |

Older screenshots and the per-asset editor call the third mode **Fixed risk**.

### Fixed lots

You set a static lot size (e.g. 0.10 lots, range **0.01–20**; above 5 lots Settings asks you to type the number to confirm) and that's the total volume of every trade, regardless of stop distance or balance. Predictable and simple: you always know how big a position will be before it opens. The trade-off is that your *dollar* risk moves with the stop — a 100-pip stop risks ten times more than a 10-pip stop on the same lot.

If you use Fixed lots, a smart way to *decide* the lot is to size it so a typical stop-loss costs roughly 1–2% of your balance. Work it out once, set the lot, and re-tune it by hand when your balance changes. (Or use **% of balance** below, which does exactly this on every trade automatically.)

```
Pick your lot = (Balance x Target Risk %) / (Typical SL Distance x Contract Size)

Where:
  Target Risk % = the share of balance you're comfortable losing (e.g. 1%)
  Contract Size = from your broker's symbol spec
                  (100,000 for forex, 100 for gold, etc.)
```

::: info Worked example — choosing the lot
**Account:** $10,000  |  **Target:** 1% ($100)  |  **Typical SL:** 200 pips on EURUSD

```
Risk budget   = $10,000 x 1%       = $100
Contract Size = 100,000
SL Distance   = 0.0200
Fixed lot     = $100 / (0.0200 x 100,000) = 0.05 lots
```

Set 0.05 lots and a 200-pip stop costs about $100. The math is a planning tool — once set, the lot is fixed, so a tighter stop risks less and a wider stop risks more. Re-run it when your balance moves meaningfully.
:::

### % of balance

Instead of a fixed lot, you set a **risk percentage** of your account **balance** (range **0.1%–100%**; raising it above 10% asks you to type the number to confirm), and TTMT does the lot math for you on every trade. It works backwards from the signal's stop-loss distance to the total lot size that would lose about that percentage if the stop is hit — so a **wider stop produces a smaller position** and a **tighter stop a larger one**, and your dollar risk stays roughly constant however far away the stop sits. It is the mirror image of Fixed lots: there the lot is constant and the dollar risk varies; here the dollar risk is constant and the lot varies.

It works across every asset class — forex, metals, indices, crypto — converting to your account's base currency, so "1% of balance" means the same dollar risk on gold as on EUR/USD. As you type your percentage, Settings shows a sample line under the row (a sample EURUSD signal with its stop, the total lots and roughly how much money is at risk), so you see the money figure before you save.

::: info Worked example — same risk, two stops
**Balance:** $10,000  |  **Risk:** 1% ($100). A EUR/USD signal with a **200-pip** stop sizes to about **0.05 lots**; a tighter **50-pip** stop on the same pair sizes to about **0.20 lots**. Either way a stop-out costs about **$100** — the lot changed so that the risk didn't. Switch to Fixed lots at 0.10 and those same two signals would risk about $200 and $50 instead.
:::

::: warning % of balance never rounds up into more risk
Small accounts and tight stops can collide with your broker's **minimum lot**. TTMT will not quietly place a larger position than your percentage implies. If the smallest lot your broker allows would risk meaningfully more than your target (beyond a small tolerance), TTMT **rejects the trade rather than over-risk you** — no orders are placed and no exposure is taken — and notifies you to raise your risk %, check any max-volume cap, add balance, or use Fixed lots for that symbol. A trade is also rejected if the stop-loss distance is too small to size against safely.
:::

### Fixed amount

Instead of a share of your balance, you set an **amount of money** (range **1–100,000**) and every trade risks that amount. The lot maths is identical to % of balance — TTMT works backwards from the signal's stop-loss distance to the lot that would lose about that amount — but the budget is the number you chose, not a share of the account. It does not shrink after a losing week or grow after a winning one, which is exactly why someone picks it: a risk rule written in money stays written in money.

The amount is in **your account's own currency**, never dollars. On a EUR account `200` is €200; on a cent-denominated account (`USC`, `GBC`) it is 200 of those cents. The same number on a template applies to every account you own, each in its own currency — under broadcast an EUR account risks €200 and a USD account $200 from one setting.

The same protections apply as for % of balance: a broker minimum lot that would over-risk the amount rejects the trade rather than over-sizing it, and the platform lot ceiling still caps the total.

**A signal's risk level does not change the amount.** In % of balance mode, a signal the parser marks high risk sizes the trade up. Fixed amount does not work that way: the amount is the ceiling you set, and nothing a channel sends can raise it. The [loss-streak reduction](/trade-config/loss-streak-risk-reduction) still applies, because it only ever lowers your size.

**Example**

**Amount:** 200. A EUR/USD signal with a **200-pip** stop sizes to about **0.10 lots**; a tighter **50-pip** stop sizes to about **0.40 lots**. Either way a stop-out costs about **200** — the same at a $20,000 balance and at a $5,000 one.

::: warning Fixed amount needs an amount
An account in Fixed amount mode with no saved amount has no budget to size against, so TTMT **skips** the trade rather than guessing a number — you get a notification saying no fixed risk amount is set. Enter an amount when you pick the mode so this cannot happen.
:::

::: warning Dollar risk vs. a dollar cap
Fixed lots aside, if you want a single trade's loss capped at an exact dollar figure regardless of stop distance, that is the **per-trade P\&L cap** (see below), not a sizing mode — it closes the whole trade at a dollar amount. Fixed amount sets the size so that a *stop-out* costs that amount; the P\&L cap closes the trade at an amount whatever the size. For a ceiling on your *whole day*, add a per-account daily-loss limit as well.
:::

## Actual risk after a channel moves the stop

TTMT sizes a trade from the stop the trade has when it opens. When the channel later moves the stop, TTMT moves the stop on your open positions but does not change the lot size. The amount the trade can lose is then different from the plan.

The trade card, the trade detail and the live view then show an **Actual risk** line, for example "Actual risk $85 · stop moved by the channel". When the actual risk is more than 1.1 times the planned risk, the line turns to a warning: "Actual risk $140 (2.8% of balance) · planned $100. The channel moved the stop after sizing. Lot size was not changed." You also get an urgent notification, on every notification level. A smaller move gets the "SL Updated" notification on the Balanced and Everything levels.

This is not the **Risk at fill** column in the trade log, which shows what the trade risked on the layers that filled.

In the live view, if the stop on your positions has changed again since TTMT recorded the figure, the line shows "—" until the figure is updated.

## Per-asset SL/TP defaults

Different instruments have different volatility, so TTMT lets you set fallback values per asset class in **Settings › Symbol exceptions**. These are *fallbacks* — they fill in values a signal omits; they are not an extra layer that competes with your other settings. A signal's own stop and targets are used unless you've turned on the matching override (see [Override Modes](/core-concepts/override-modes)), and a channel's preset can override the account value.

Available asset classes:

* **Forex Majors** (EURUSD, GBPUSD, USDJPY, etc.)
* **Forex Minors** (EURGBP, AUDNZD, etc.)
* **Metals** (XAUUSD, XAGUSD)
* **Indices** (NAS100, US30, SPX500, DAX)
* **Crypto** (BTCUSD, ETHUSD)
* **Energies** (XTIUSD, XBRUSD, natural gas)

You can also set the same fields for **a single instrument**, which outranks its class. A symbol that fits no class is sized by your account settings. See [Per-Asset Overrides](/trade-config/per-asset-overrides).

Each asset class can set:

| Field | What it does |
|:---|:---|
| **Volume mode** | Use Global (inherit your base sizing), Fixed Lots, Risk % of balance, or Fixed risk (account currency) — set per class |
| **Max volume (lots)** | A hard cap on the lot size for this asset class |
| **Default Stop Loss (pips)** | Fallback stop when a signal omits one (1–500) |
| **Default TP1–TP6 (pips)** | Fallback take-profit distances when a signal omits them (1–500 each) |

::: info Example configuration
| Asset Class | Volume mode | Max volume | Default SL |
|:---|:---|:---|:---|
| Forex Majors | Fixed Lots 0.10 | 1.0 lots | 50 pips |
| Metals | Use Global | 0.50 lots | 80 pips |
| Indices | Fixed Lots 0.05 | 0.10 lots | 120 pips |
:::

## Total-volume safety ceiling

Regardless of your sizing settings, TTMT caps the total size of any single trade at a fixed number of lots. This is a backstop, not something you configure. **It is a flat lot cap, the same on every account, so it does not scale to your balance.** It stops a runaway multi-layer setup at a high lot size, but it will not catch a lot size that is merely far too large for a *small* account — a fixed lot of 2.00 on a few-hundred-euro account sits well under it, and in that case the broker's margin check is what refuses the order.

::: warning
Your per-asset max-volume caps apply *on top of* the platform ceiling. The lower of the two always wins.
:::

Because of that gap, TTMT also **measures every planned trade against your account equity** — lots × contract size × price ÷ equity — on the whole order set rather than per order, and on notional rather than lot count (a lot of gold and a lot of EURUSD are not the same amount of money). Today this check is **advisory**: it is recorded so the platform can learn what "far too large" means across real accounts, and it does not yet refuse a trade. Once it is switched to enforcing, an oversized plan will be skipped and you will be notified with the setting to check — usually **Lot size** in **Settings › Size per trade**. Until then, the broker's margin check remains the last line of defense. This is the only place the backstop is explained in full; the order pages link here.

## Stop-loss safety checks

### Missing stop-loss

If a signal arrives with no stop, TTMT treats it as infinite risk and fills one in from your **Stop loss when the signal has none** row (**Settings › Stop loss**, a distance in pips; per-asset defaults from **Symbol exceptions** apply first for a class or instrument that has one). Treat it as a deliberately conservative emergency stop: set it wide enough to survive normal volatility.

Without this, a "BUY GOLD, TP soon" signal with no stop would ride with nothing protecting it — one reversal could wipe the position. With it, the trade gets your emergency stop.

If you would rather always use your own stop whatever the signal says, turn on **Always use my stop, not the signal's** in the same section (see [Override Modes](/core-concepts/override-modes)).

### Bad stop-loss detection

TTMT catches several dangerous stop conditions and corrects or rejects them. For a stop that looks wrong, **If the signal's stop looks wrong** (**Settings › Stop loss**, Full view) chooses between **Use my stop** and **Trust the signal**:

* **Wrong-side stop** — a BUY with the stop *above* entry (it would close instantly at a loss).
* **Stop inside the entry zone** — physically impossible; the stop would sit among your own pending orders.
* **Stop too far** — the stop sits more than **5 times the distance to your farthest take-profit**. The check is zone-aware, so a deep limit waiting for a retracement isn't wrongly flagged. A stop this far out means a tiny reward against an enormous risk.

These are separate from the decimal-slip guard that catches fat-fingered prices (a value off by a factor of ten or more), which is covered on [Signal Processing](/core-concepts/signal-processing).

A zone that would reach the stop is not refused: TTMT shortens it so the deepest layer stays 5 pips in front of the stop. The one zone it refuses is a signal whose own stop sits inside the zone it posted. See [How Your Entry Zone Is Decided](/core-concepts/entry-zone-resolution).

## Before every trade: the final checks

Every trade passes five pre-trade checks before any orders are submitted:

1. **Connection healthy** — your MetaTrader connection is active.
2. **Symbol available** — your broker offers this symbol.
3. **Volume within caps** — the calculated size is inside the hard caps.
4. **Margin sufficient** — there's enough free margin for the trade.
5. **No protective pause** — the account isn't in a protective pause.

The protective pause stops trading on an account after repeated failures during a broker outage or connectivity problem, so a string of errors can't snowball into runaway losses. See [Connection Resilience](/safety-and-reliability/connection-resilience).

## Per-trade P\&L cap — close one trade at a dollar amount

The per-trade P\&L cap is a dollar ceiling on a *single* trade's result — TTMT closes the whole trade automatically the moment its combined profit or loss reaches the figure you set. It is not a stop-loss (that protects one position at a price) and it is not the daily-loss limit (that protects your whole account across a day) — it sits between the two, bounding what any one trade can win or lose in dollars.

::: tip Quick start
Set it in **Settings › Size per trade**, in Full view: **Close a trade at a set loss or profit**. Flip the switch on and TTMT suggests a loss and a profit figure from your own recent trading — accept them or type your own. Leave either field blank to skip that side. It's available on every plan.
:::

### Why a stop-loss isn't the whole story

Your broker stop-loss protects each position one at a time. But TTMT spreads a single signal across a grid of layered entries — up to 36 orders across as many as 6 layers (see [Order Execution](/core-concepts/order-execution)). On a deep retracement, several of those layers fill, and your real exposure is the *sum* of every filled position, not any one stop. The per-trade cap is the only setting that watches that combined total.

| Tool | What it caps | Scope |
|:---|:---|:---|
| **Stop-loss** | One position, at a price | A single leg of the trade |
| **Per-trade P\&L cap** | One trade's combined profit/loss, in dollars | All of that trade's layers together |
| **Daily-loss limit** ([Risk Limits](/safety-and-reliability/risk-limits-halt)) | Your account's losses for the day | The whole account, per session |

::: info Worked example — capping a layered trade
You set a **$60 loss cap per trade**. A GOLD buy opens across four layers — a market entry plus three deeper limit orders — and as price dips, all four fill. You now hold four positions on this one trade, each with its own stop. Individually none has hit its stop, but together they're down **−$62**. The per-trade cap reads the combined −$62, sees it past your −$60 ceiling, and closes all four positions at once. No single stop had to be reached.
:::

### Setting your loss and profit caps

The two sides are independent — set a loss cap, a profit cap, both, or neither:

* **Loss cap** — closes the trade once its combined loss reaches your amount (for example, close at −$50). Your dollar-loss safety net for one trade.
* **Profit cap** — closes the trade once its combined profit reaches your amount (for example, close at +$100). A clean way to take a fixed dollar profit rather than waiting on take-profit levels that your open orders are re-split across as layers fill (see [TP Redistribution](/core-concepts/tp-redistribution)).

Amounts are in your account's base currency — the currency your broker reports your balance in — and there's no currency conversion. When you first switch the limit on, TTMT pre-fills a **suggested** loss and profit drawn from your last 30 days of trades (roughly 1.5x your average losing trade and 2x your average winning trade, with small floors if you're new). The suggestion is a starting point — edit it freely.

### When the cap fires

```mermaid
flowchart TD
    A["Trade is open<br/>one or more layers filled"] --> B["TTMT adds up the trade's P&L<br/>closed partials + floating positions"]
    B --> C{"Past your loss<br/>or profit cap?"}
    C -->|"No"| A
    C -->|"Yes, from a real close"| E
    C -->|"Yes, from a live price"| D{"A brief spike,<br/>or holding?"}
    D -->|"Spike — gone next moment"| A
    D -->|"Still past after a moment"| E["Close the whole trade<br/>all positions at once"]
    E --> F["Trade Log shows<br/>Loss limit or Profit target"]

    style A fill:#023e8a,stroke:#0096c7,color:#e6f6ff
    style B fill:#023e8a,stroke:#0096c7,color:#e6f6ff
    style C fill:#5a4708,stroke:#e7c000,color:#fff6d6
    style D fill:#5a4708,stroke:#e7c000,color:#fff6d6
    style E fill:#0d4f3c,stroke:#36d399,color:#d6fff0
    style F fill:#0d4f3c,stroke:#36d399,color:#d6fff0
```

Step by step:

1. **It watches continuously** — TTMT re-totals the trade's profit and loss roughly once a second from your live positions, plus anything already banked from partial closes.
2. **A momentary spike won't trip it** — a floating loss or profit has to *hold* past your cap for a moment before TTMT acts, so a one-tick spread spike can't close you out. A real close (a partial taking profit, or a position hitting its stop) counts immediately.
3. **It closes the whole trade** — every open position on that trade is closed together. If the broker connection is briefly unhealthy, or the trade is mid-rebalance, TTMT waits and retries on the next check rather than acting on stale prices.
4. **It shows in your logs** — the trade lands in your [Trade Log](/dashboard/trade-log) with a **Loss limit** chip (red) or a **Profit target** chip (green), and the trade's detail view shows the **Auto-close at** amount it was watching. You can preview the cap on any message in the [Signal Tester](/dashboard/signal-tester) before it ever trades.

::: warning A per-trade close is final
When a trade closes by its P\&L cap, that trade is done — there's no Resume or Recalibrate the way there is for the daily Risk Limit. The cap protects that one trade and then steps aside; your other open trades and your channels keep running normally.
:::

### The cap is set when the trade opens

Your cap is captured the instant a trade opens. If you later raise, lower, or switch off the limit, trades already running keep the cap they opened with — only trades opened after you **Save** use the new value. One exception: when the trading service restarts (for example for an update of the trading service, or after a crash), every open trade picks up your current limit, or loses it if you switched it off. A trade whose orders were still being placed at that moment has no per-trade limit until the next restart. If you turn the limit off while trades are open, TTMT asks you to confirm, then leaves those open trades on their original caps until such a restart and applies the change to new trades.

### Per-channel caps

Like most settings, a channel's preset can change your account default. In a preset's **Size per trade** section, **Close a trade at a set loss or profit** is a setting the preset can set — tighten the loss cap on a noisy channel, or set a higher profit target on a strong one, without touching your global default. See [Creating Presets](/presets/creating-presets) for how a preset's own values and the account's work.

## Daily-loss protection (Risk Limits)

Where the per-trade cap above guards a single trade, the per-account **daily-loss limit** guards your whole account across a day — it automatically halts new trades, and optionally closes open ones, once your day's losses cross it. This is the account-wide enforced auto-cap: when it triggers, trading actually stops. Risk Limits are set per account, and a preset cannot loosen them. A preset can add its own, tighter daily budget (on the **Presets** tab of Settings, in **Daily limits**), which shows up in the Trade Log as **Profile day limit**. When the account limit is hit, **When a limit is hit** decides whether TTMT stops new trades or also closes everything (**Stop new trades** / **Stop and close everything**). It's covered in full, including how to resume and recalibrate after a deposit or withdrawal, on [Risk Limits](/safety-and-reliability/risk-limits-halt).

## Loss-streak risk reduction (experimental)

Separately from the caps above, TTMT has an experimental control that shrinks your position size automatically after a run of losing trades on a given channel-and-account pairing, then restores it after a win. It's off by default and applies on top of your ordinary sizing. Because it changes how much you risk after a bad streak, test it on a demo account before using it on live capital. See [Loss-Streak Risk Reduction](/trade-config/loss-streak-risk-reduction) for the full behavior, floors, and reset modes.

## Recovery Guidance (advisory)

Recovery Guidance is an advisory banner on your dashboard — it *suggests*, it does not *enforce*. It appears when today's loss reaches a share of your **current account balance**, or after two or more losing trades in a row, and it offers gentle prompts: check market conditions, review your channels, consider downsizing. It auto-hides once you're no longer in drawdown and can be dismissed for the session.

| Severity | Trigger | What it suggests |
|:---|:---|:---|
| **Minor** | Today's loss ≥ 10% of current balance (or 2+ losing trades) | Check whether market conditions favor your strategy. |
| **Big** | Today's loss ≥ 20% of current balance | Above, plus review your signal sources for quality. |
| **Major** | Today's loss ≥ 40% of current balance | Above, plus consider downsizing position size temporarily. |

The math is today's profit-and-loss against your *current* balance — not your starting or peak balance. A $10,000 account down $1,100 today (11%) shows the Minor banner suggesting a market check; tomorrow, with the day reset, it's gone.

::: info Advisory vs enforced
Recovery Guidance *suggests*; Risk Limits *enforces*. The same trader who set a $1,500 daily-loss limit would have trading *actually halt* at −$1,500, where Recovery Guidance only advised. If you want trading to stop after a bad day, set a daily-loss limit — see [Risk Limits](/safety-and-reliability/risk-limits-halt).
:::

## Emergency controls

**Kill switch.** **Close All Positions** on the dashboard opens the **Close Active Trades** dialog, where you pick the scope: **TTMT Trades Only** leaves your manual trades untouched, while **All Trades** sweeps every open position on the account, including manual trades. It fires the closes concurrently — every position is sent at once for the fastest possible exit — and a single failed close doesn't stop the rest of the sweep.

**Channel pausing.** Pause an individual channel on an account at any time to stop new trades from it without touching your other channels. Pausing changes routing only: trades already open keep their breakeven, trailing stop, TP redistribution and daily limits, waiting orders stay in place and their timeouts keep running, and nothing is closed. While the channel is paused, its later close, modify and stop-loss messages are not applied either. The pause dialog spells this out and asks before it pauses.

See [Emergency Controls](/safety-and-reliability/emergency-controls) for the full treatment.

## How your settings combine

For most settings, the rule is simple: **a channel's preset value wins; if it has none, your account default applies.** Signal-provided values are used directly when you haven't overridden them. The per-asset defaults above only fill in values a signal omits — they're a fallback, not a tier that overrides your account.

Volume is the one thing that's never inherited from a signal — it's always computed from your sizing settings. See [Settings Inheritance](/channels/settings-inheritance) and [Applying Presets](/presets/applying-presets) for the full model.

::: danger Golden Rule
Never risk more than you can afford to lose. For most traders, **1–2% per trade** is a sensible maximum.
:::

## Ideal Settings & Trading Strategy

### Scenario 1 — Capital-Preservation Beginner ($5k personal)

**Setup:** New live trader, $5,000 account, one well-rated channel.

**Settings:**

* Sizing: Fixed lots, 0.10 (≈1% of a $5k account on a 50-pip stop)
* Per-asset default stop: conservative (50 pips forex, 80 pips gold)
* Per-trade P\&L cap: on, ~$50 loss (accept the suggested figure)
* Daily-loss limit: on, ~5% ($250)
* Recovery Guidance: leave enabled (it's automatic)

**Why:** A 0.10-lot fixed size keeps any single loss small on a $5k balance, a small per-trade cap stops one runaway trade from eating the day, and a 5% daily-loss halt stops a bad day from compounding before you notice. Conservative default stops protect signals that omit one.

**Watch for:** A tight daily limit can halt you mid-session on a normal drawdown — set it high enough to ride normal variance.

**Switch when:** You're consistently green and want more size — Scenario 2.

### Scenario 2 — Balanced Moderate ($50k personal)

**Setup:** Experienced trader, $50,000 account, 3–4 channels.

**Settings:**

* Sizing: Fixed lots, 0.50 (≈1% of a $50k account on a 100-pip stop)
* Per-asset max caps (forex 1.0 lot, gold 0.5 lot)
* Per-asset stop/target defaults tuned per class (Forex Majors / Metals / Indices)
* Daily-loss limit: on, ~8–10%
* Always use my stop, not the signal's: on for sloppy channels

**Why:** A 0.50-lot base keeps a typical loss near 1% of a $50k balance, per-asset caps prevent over-leverage on volatile instruments, and a moderate daily limit gives room without abandoning the safety net.

**Watch for:** Several channels firing the same direction can stack exposure beyond what one trade implies — watch your margin.

**Switch when:** You move to a funded prop account with hard external rules — Scenario 3.

### Scenario 3 — Prop-Firm Drawdown Discipline ($200k prop)

**Setup:** $200,000 funded prop account with a strict daily-loss rule and a max-drawdown rule.

**Settings:**

* Sizing: Fixed lots, 1.0 (≈0.5% of a $200k account on a 100-pip stop) — tuned so a typical loss stays well inside the firm's dollar limits
* Per-asset max caps tight on every class (well below the platform safety ceiling)
* Per-trade P\&L cap: on, a tight loss cap so no single layered trade eats a large slice of the daily allowance
* Daily-loss limit: set *below* the firm's daily rule, with **Stop and close everything** on breach
* Always use my stop, not the signal's: on everywhere (no naked trades allowed)

**Why:** Prop rules are unforgiving. Setting your own daily-loss halt *inside* the firm's limit means TTMT stops you before the firm does.

**Watch for:** Layered entries fill more on deep retracements — your worst-case exposure is the deepest fill, not the market layer. Size to the deepest fill.

**Switch when:** You move to a funded account with looser rules — Scenario 2.

## Related pages

* [Risk Limits](/safety-and-reliability/risk-limits-halt) — the enforced daily-loss halt, resume, and recalibrate.
* [Loss-Streak Risk Reduction](/trade-config/loss-streak-risk-reduction) — the experimental after-a-loss sizing control.
* [Order Execution](/core-concepts/order-execution) — how sizing feeds the layered entry.
* [Order Management](/core-concepts/order-management) — volume calculation details and worked numbers.
* [Signal Processing](/core-concepts/signal-processing) — the safety checks that filter risky signals.
* [Breakeven Management](/core-concepts/breakeven-management) — locking in profit after TP1.
* [Emergency Controls](/safety-and-reliability/emergency-controls) — the kill switch in depth.
