---
url: /getting-started/subscribing-channels.md
description: >-
  How to discover, follow, and configure Telegram signal channels in TTMT,
  including quality badges and account assignments.
---

# Subscribing to Channels

With Telegram and MetaTrader connected, the next step is telling TTMT which channels to monitor for trading signals. This is where you choose your signal sources and assign them to your trading accounts.

## Discovering Channels

TTMT provides two ways to find channels:

### Channel Library (Recommended)

The **Channel Library** is TTMT's curated collection of pre-configured signal channels. Each channel in the library has been reviewed and comes with optimized signal-reading settings.

1. Go to **Channels** in the dashboard
2. Click **Add channel**, then **Ready to enable** (channels TTMT carries that you follow on Telegram and haven't added). To look around first, use **Browse library**.
3. Look for quality badges to identify the best channels
4. Click **Enable** to add it with pre-configured settings. With one account it starts trading there. With more than one account, **Enable** doesn't pick an account: open the channel and use **Add…** on the account you want.

::: tip One-Click Setup
Library channels come pre-configured with optimized settings -- how signals are read, default symbol mappings, and execution mode. You can start trading from a library channel without touching any settings.
:::

### Channels TTMT does not carry yet

If a channel you follow is already in the TTMT library, it will not appear here — it is under **Ready to enable** instead, where you enable it in one click. This section is only for channels the library does not have.

1. Go to **Channels** in the dashboard
2. Click **Add channel**, then **Request a new channel**
3. TTMT synchronizes with your Telegram account and shows the channels it does not already have
4. Submit the one you want, and TTMT analyzes it before it starts monitoring

Channels imported from Telegram may need some manual configuration since TTMT does not have pre-built settings for them.

::: tip Let the AI set it up for you
Instead of configuring an imported channel by hand, you can [analyze your own channel](/channels/analyze-your-own-channel) — TTMT's signal-reading AI infers the execution mode and default SL/TP for you, and you can self-approve it to trade on the next signal.
:::

## Quality Badges

Library channels display quality badges that help you evaluate signal sources at a glance:

| Badge | Meaning |
|:---|:---|
| **Verified** | Channel has been reviewed by the TTMT team for signal quality and consistency |
| **Recommended** | Consistently strong performance metrics across TTMT users |
| **Community** | A trader added the channel themselves and the TTMT team has not reviewed it yet |

These badges are maintained by the TTMT team based on community performance data and how reliably signals are read from the channel.

## Channel-Account Assignments

One of TTMT's most powerful features is the ability to assign channels to specific trading accounts. This is what determines which channels trade on which accounts.

### How It Works

When you follow a channel, you assign it to one or more of your connected MetaTrader accounts. Each assignment can be independently controlled:

* **Running** -- new signals from this channel open trades on that account
* **Paused** -- no new trades from this channel on that account; nothing already open is closed or cancelled. The pause dialog spells out three things: what **Stops** (new trades from the channel on that account), what **Keeps running** (breakeven, trailing stop, TP redistribution and daily limits on open trades; pending orders stay open; order timeouts keep running too, though the dialog doesn't list them) and what is **Not applied while paused** (the channel's close, modify and SL messages).

You can Pause or Resume a channel on each account independently, and broadcast one channel across several accounts at once -- the same signal then executes on every account where it is Running. See [Multi-Account Trading](/accounts/multi-account) and [Account Broadcasting](/accounts/account-broadcasting) for the full cross-account story.

```mermaid
flowchart LR
    C1["Gold Signals\nChannel"] -->|Running| A1["Live Account"]
    C1 -->|Paused| A2["Demo Account"]
    C2["Forex VIP\nChannel"] -->|Running| A1
    C2 -->|Running| A2
    C3["Scalping\nChannel"] -->|Running| A2

    style C1 fill:#023e8a,stroke:#0096c7,color:#e6f6ff
    style C2 fill:#023e8a,stroke:#0096c7,color:#e6f6ff
    style C3 fill:#023e8a,stroke:#0096c7,color:#e6f6ff
    style A1 fill:#0d4f3c,stroke:#36d399,color:#d6fff0
    style A2 fill:#5a4708,stroke:#e7c000,color:#fff6d6
```

### Example Setups

* **Conservative**: Map high-confidence channels to your Live Account, experimental channels to Demo only
* **Diversified**: Map forex channels to one broker, metals channels to another
* **Testing**: Run a new channel on Demo for a week before enabling it on Live

::: info Assignment is the only control
There is no separate "channel on/off" switch. The status (Running or Paused) on each account is the sole control for whether signals from that channel get executed. This keeps the model simple and predictable.
:::

## Execution Modes

Each channel operates in one of two execution modes, depending on how the signal provider formats their messages:

| Mode | When to Use | Behavior |
|:---|:---|:---|
| **Wait for Full Signal** | Channel sends full signals (Entry + SL + TP) in a single message | Only executes when all required data is present |
| **Trade on First Alert** | Channel sends an alert first, then provides details in followup messages | Executes immediately on the alert, applies followup data as modifications |

The execution mode reflects how the channel posts signals. A channel that sends an alert first and then fills in the full trade details (entry, SL, TP) in a followup message is an alert-then-details channel -- pair it with **Trade on First Alert** so TTMT acts on the alert and updates the trade as details arrive.

Library channels have the correct execution mode pre-configured. For imported channels, you may need to observe a few signals to determine which mode fits best.

## Channel Settings

After adding a channel, open it from the **Channels** page to set it up. Its page shows which accounts trade it and with which preset, and four tabs: **Setup**, **Performance**, **Signals** and **History** (a TradingView-webhook channel adds **Webhook**). The **Setup** tab holds:

* **How trades open** -- the execution mode and a default symbol.
* **Preset per account** -- which preset each account uses for this channel, or **Use account settings**. See [Applying Presets](/presets/applying-presets).
* **Stop loss & take profit** -- fallback values used only when a signal leaves them out.
* **Which signals are taken** -- the **Symbols** list, **Skip posts containing** (words that drop a message before it is read), forum topics and trading hours. These filters apply to the channel on all your accounts. The forum topic list is the default for accounts without their own topic rules: on a forum channel, an account can give a topic its own preset, or stop it there. See [Topic rules](/channels/channel-settings#topic-rules). A signal that lands inside blocked hours is skipped, not held for later; account and channel blocks combine, and a preset with its own hours replaces them for signals that use it. See [Message Filters](/channels/message-filters).
* **Orders & position size** -- the limit-order timeout and smaller size after losses.

Setup keeps your edits as a draft until you press **Save changes** in the bar at the bottom. See [Channel Settings](/channels/channel-settings) for a full reference.

::: tip Presets
If you want different trading settings for different channels (e.g., conservative lot size for one channel, aggressive for another), create a **preset** and give it to the channel. It changes your account defaults for that channel only.

[Learn about presets -->](/presets/)
:::

## Managing Your Channels

The **Channels** page shows one card per channel (or one row per channel in the **Table** view, on a window at least 1280 px wide). Each card has a status line per account, such as **Running** on Pepperstone ••2345 · Gold Tight: a dot and a word for the state, the account, and the preset it uses (or **Account settings**). With more than one account, the account slider at the top picks which account the figures are for. The chips above the cards filter by state: **All**, **Running**, **Paused**, **Not here** and **Needs attention** (plus **Halted** when an account hit a daily limit). A card on the **Needs attention** chip says why, with a link that fixes it; the seven reasons are listed in [Following Channels](/channels/following-channels#needs-attention).

Two quick actions sit on the card itself, for the account chosen in the slider:

* **Pause** / **Resume** -- the pause icon (named "Pause on {account}…" on hover) and the **Resume** button. Pause asks you to confirm first and says what it stops, what keeps running and what is not applied while paused; Resume starts new trades again.
* **The preset picker** -- click the preset in the status line to switch it, or choose **Use account settings**. It saves straight away and offers **Undo**.

The card's ⋯ menu holds **Open**, **Setup**, **Accounts** (Pause or Resume on your other accounts), **Move to group…**, a report option, and **Remove channel…**, which removes all of its accounts and stops monitoring it entirely. The confirmation lists what stops, what is kept (your history) and what is lost (its account and preset choices).

## Related pages

* [Channel Settings](/channels/channel-settings) -- the full reference for a channel's page
* [Message Filters](/channels/message-filters) -- the symbol list and skipped words
* [Multi-Account Trading](/accounts/multi-account) -- assigning and broadcasting channels across accounts
* [Presets](/presets/) -- per-channel changes to your settings

***

## Next Steps

Your channels are set up. Now let's configure your trading style with the setup wizard.

[Configure your trading style -->](/getting-started/quick-setup-wizard)
