---
url: /reference/glossary.md
description: >-
  Definitions of TTMT terms — Risk Limits, the Adaptive Engine, trade lifecycle,
  channels, message filters, connection providers, Oracle, sharing — plus
  standard trading vocabulary.
---

# Glossary

This glossary defines the terms you meet across TTMT, both words specific to the platform and the standard trading vocabulary they sit alongside. The TTMT terms are grouped by topic so related ideas stay together; general trading terms follow at the end. When a term has a dedicated guide, the entry links to it.

## TTMT Terminology

These are grouped by topic: Risk Limits, the Adaptive Engine, trade lifecycle, channels, connections & providers, and presets, overrides & sharing.

### Risk Limits

::: info
Risk Limits is off by default. Turn it on per account in your account settings. See [Risk Limits and account halts](/safety-and-reliability/risk-limits-halt).
:::

**Risk Limits** — An opt-in, per-account daily-loss safety system. When your realized loss for the day crosses the threshold you set, the account is halted: new signal-driven trades stop. Off by default. Each MetaTrader account has its own independent Risk Limits state. See [Risk Limits and account halts](/safety-and-reliability/risk-limits-halt).

**Halt** — The state an account enters when its daily-loss (or daily-profit) threshold is crossed. New signals from channels stop executing on that account until you resume. Existing open positions are left alone unless you also enabled close-all. See [Risk Limits and account halts](/safety-and-reliability/risk-limits-halt).

**Resume Trading** — Clears the halt so signals execute again. Resume keeps the day's accumulated numbers — your realized profit and loss, the trades already counted, and the day-start equity. It does not reset your daily loss back to zero. Use it when you have decided to keep trading after a halt. See [Risk Limits and account halts](/safety-and-reliability/risk-limits-halt).

**Recalibrate Baseline** — Re-anchors the threshold to your current equity after a deposit, withdrawal, or manual broker adjustment. This is a different action from Resume: Resume keeps counting against the old baseline; Recalibrate moves the baseline. See [Risk Limits and account halts](/safety-and-reliability/risk-limits-halt).

::: tip Resume vs. Recalibrate
**Resume** keeps the day's count — the loss already taken still counts against the cap. **Recalibrate** moves the baseline so the cap is measured against your new balance. Example: you hit a 5% halt at 10am. Resume lets the day's signals trade again, still counting the loss. Recalibrate is only for after you deposited funds and want the cap measured against the new balance.
:::

**Daily Loss Cap (Halt Threshold)** — The percentage or fixed-amount loss that triggers a halt. Default is 5% of your baseline; you can set a fixed currency amount instead. A matching daily-profit cap can also halt the account on a good day.

**TTMT-Only P\&L Scope** — Risk Limits counts only the trades TTMT placed. Trades you opened manually on the broker platform do not count toward the daily-loss cap.

### The Adaptive Engine

How TTMT places and manages the orders behind a single signal.

**Adaptive Engine** — TTMT's order-placement model. You choose how many entry **layers** to split a signal into (1 to 6, default 4); the engine then derives how many individual orders each layer needs from your lot size and your broker's minimum lot and lot step. The order count is not something you set — it follows your size, capped at 6 orders per layer and 36 orders in total. See [How orders are placed](/core-concepts/order-execution).

**Layer** — One price level in the entry zone. TTMT places between 1 and 6 layers (default 4). Layer 1 is the entry nearest the current price; deeper layers sit further into the zone to catch retracements. How volume is weighted across the layers is set by **How the size is split across layers** (the entry strategy) — the default **Even** splits it equally (25 / 25 / 25 / 25 across four layers, before broker rounding).

**Entry Strategy (How the size is split across layers)** — How volume is weighted across layers. Four options in **Settings › Entries** (default is Even):

* **Even** (`even`, the default) — equal size on each layer (25 / 25 / 25 / 25 at four layers).
* **More at first** (`front-loaded`) — more size on the market layer, less on deeper ones.
* **More deeper** (`martingale`) — most size on the deepest, best-priced layers, to average down harder.
* **All at once** (`single`) — one order at the signal's entry, always on 1 layer.

Example: on the same XAUUSD signal, `even` puts equal size on each layer; `martingale` puts the most size on the deepest layer to average down harder. The names in backticks are the reference names used by the [Settings Contract](/reference/settings-contract).

**Entry Zone** — The price range TTMT spreads its layered orders across. For a BUY with the price at 1.0000 and a 10-pip zone, orders sit between 1.0000 and 0.9990. The zone width defaults to a percentage of the stop-loss distance.

**Entry Zone Expansion (Widen the zone toward TP1)** — An opt-in widening of the entry zone on the favorable (Layer-1) side, by 1 to 20 pips (**Widen by**), so near-miss entries still fill. Off by default. It is one-sided by design: it never deepens your worst-case risk. See [Entry zone expansion](/core-concepts/entry-zone-expansion).

**Entry Zone Resolution** — The step that decides the *effective* entry zone before a trade is placed, combining the signal's stated zone with your settings (single-layer, zone override, expansion). See [Entry zone resolution](/core-concepts/entry-zone-resolution).

**TP Strategy (How profit is taken)** — How volume is distributed across take-profit levels: **Most at first TPs** (the default — secures profit early), **Equal** (roughly equal across all TPs), or **Most at last TPs** (chases trends, the final TP gets the most). The reference names are Progressive, Balanced and Extended. See [TP redistribution](/core-concepts/tp-redistribution).

**TP Count Limit (How many TPs to use)** — Caps how many take-profit levels are used: 1 to 6, or **As the signal**, which uses all of the signal's TPs. Default is As the signal.

**Redistribution (Move TPs closer when deeper layers fill)** — When deeper layers fill during a retracement, TTMT re-spreads the open positions' take-profit targets so the part of the trade you hold matches your TP strategy again. TP prices never move, only the level each position uses. Layer 1 normally locks to TP1 as a safety net (see L1 Lock). See [TP redistribution](/core-concepts/tp-redistribution).

**L1 Lock (Keep layer 1 on TP1 when that happens)** — The rule that locks Layer-1 positions to TP1 once any deeper layer fills, turning Layer 1 into a break-even safety net. On by default; turning it off lets Layer 1 be re-spread like the rest. On the Extended TP strategy the largest Layer-1 position is left out of the lock. Example: price retraces and your deeper layers fill. With L1 Lock on, your first entry's target snaps to TP1 so the whole trade can break even; with it off, Layer 1 takes whatever target the re-spread gives it. See [TP redistribution](/core-concepts/tp-redistribution).

**Runner (Open-TP)** — The last position in a trade with its take-profit removed (set to "open"), so it rides the trend protected only by breakeven or a trailing stop. Switched on with **Let the last TP run without a target** in **Settings › Take profits**; off by default. See [Runner positions](/trade-config/runners).

**% of Balance (Percentage Sizing)** — A position-sizing mode (**% of balance** under **How to size each trade**) where you set the share of your account **balance** a single trade may risk (0.1%–100%; raising it above 10% asks you to confirm) instead of a fixed lot. TTMT computes the lot from the signal's stop-loss distance so the dollar risk stays about constant — a wider stop gives a smaller position, a tighter stop a larger one. If your broker's minimum lot can't fit the risk budget, the trade is rejected rather than over-risked. Contrast with **Fixed Lots**. See [Position sizing](/core-concepts/risk-management#position-sizing).

**Fixed amount (Fixed Risk)** — A sizing mode where you set a fixed amount of money to lose at the stop on each signal (**Amount per signal**, for example 50 per trade), in your account's currency and regardless of balance. Choose it under **How to size each trade** in **Settings › Size per trade** or in a preset, and set one amount for an asset class in a [Per-Asset Override](/trade-config/per-asset-overrides).

**Volume Cap** — A platform safety ceiling on the total volume across all layers of one trade. It is a backstop, not something you select — higher internal ceilings can exist for special account configurations, but it is not user-adjustable. Example: if your settings would size a trade beyond the ceiling, TTMT clamps it down before placing any order.

### Trade Lifecycle

Terms describing what happens to a signal and trade over its life.

**Two-Phase Signal** — A signal that arrives in two parts: an alert ("Prepare to buy XAUUSD…") then a confirmation with the entry, stop loss, and take-profit. In **Wait for Full Signal** mode, TTMT waits for the second message; in **Trade on First Alert** mode, it acts on the first and modifies on the second. When your SL or TP overrides are active, an alert-shaped signal can be elevated to execute immediately because your own defaults supply the missing levels.

**Followup (Follow-up Signal)** — The second-phase message that adds or updates details after an alert. It is applied to the existing trade as a modification, not a new trade.

**Effective Settings** — The settings actually applied when a trade executes, after merging the channel's preset over your account defaults. Where the preset sets a value, it wins; where it leaves a value blank, your account default fills in. See [Settings inheritance](/channels/settings-inheritance).

**Breakeven Buffer (Lock in a small profit)** — The pips added past the entry price when the stop loss moves to breakeven, so spread does not stop you out at exactly entry. Default is 2 pips. It is read whenever breakeven places a stop: at a TP level, once in profit, or from a channel message. A stop move to a TP goes to the TP price, or to the position's entry plus this buffer if that protects more. Not the same as **Lock in profit at each TP**.

**Breakeven once in profit** — A setting that sets breakeven once the trade is a set distance in profit, measured from the worst filled entry: in pips, R or money in your account currency. It waits until the first order fills and fires once per trade. Off by default and marked Experimental. Example: with 15 pips, a BUY whose worst filled entry is 1.1000 gets breakeven when the bid reaches 1.1015; a SELL at 1.1000 gets it when the ask reaches 1.0985. See [Breakeven management](/core-concepts/breakeven-management#breakeven-once-in-profit).

**Lock in profit at each TP** — A setting that moves the stop again after breakeven: when price reaches a TP, the stop goes to the price of an earlier TP (the previous TP, or 2 or 3 TPs earlier, set in **Stop goes to**). TTMT never moves the stop back. It needs Auto-Breakeven or Breakeven once in profit. Off by default and marked Experimental. Example: a BUY at 1.1000 with TP1 1.1020 and TP2 1.1040 has its stop at 1.1020 after TP2; a SELL at 1.1000 with TP1 1.0980 and TP2 1.0960 has its stop at 1.0980 after TP2. See [Breakeven management](/core-concepts/breakeven-management#lock-in-profit-at-each-tp).

**Worst filled entry** — The least favourable entry price among a trade's open positions: the highest on a BUY, the lowest on a SELL. Breakeven once in profit measures profit from it, and R is the distance from it to the stop when the first order filled.

**Trailing Stop** (formerly "Trailing stop on the last TP") — A stop loss that follows price at a fixed distance as price moves your way. Once the stop passes entry, it locks in gains. Off by default; the distance (**Trail by**) is configurable in pips (default 30). You choose when it starts and which positions it moves. It works the same on MetaAPI Cloud and on TTMT Direct, and TTMT moves the stop. See [Position protection](/safety-and-reliability/position-protection#trailing-stop).

**Position Reconciliation** — TTMT periodically compares its own record of a trade against the broker's live state and corrects any drift — for example, a position that closed at the broker but was not yet recorded.

**Automatic Safety Pause** — A per-account safety mechanism that temporarily stops execution after repeated failures, then tests recovery automatically before resuming. It clears on its own after a short cooldown plus a run of consecutive successful operations (by default, two). Each MetaTrader account has its own independent safety pause. (Known internally as the circuit breaker.) See [Execution safety](/safety-and-reliability/execution-safety).

**Trade-End-Reason** — The label on each finished trade in the Trade Log that says *why* it ended. The trade status says where a trade landed; the end reason says why. Current reasons include: **Won** and **Lost** (closed in profit or loss); **Not Filled** (orders placed, none filled — no money was at risk); **Rejected** (the broker refused it — invalid stops, market closed, or symbol disabled); **Closed by Channel** (a close/exit signal); **Canceled by You** (a manual close); **Loss Limit / Profit Target** (your per-trade P\&L limit closed it, sign-aware); **Stopped Out** (the broker liquidated the position for insufficient margin — not a strategy stop-loss); **No Follow-Up** (the alert never got its follow-up in time); and **Under Review / Needs Attention**. An **Automated** marker flags outcomes reached by automation. See [Trade Log](/dashboard/trade-log).

**Stopped Out** — A trade end reason meaning the *broker* force-liquidated the position because the account ran out of margin. This is distinct from a normal strategy stop-loss: it is not the SL you or the signal set, but the broker protecting itself. It usually signals your position size was too large for your balance.

**Loss Limit / Profit Target** — The trade end reason shown when a trade is closed by your per-trade P\&L limit — the maximum loss or profit you set for a single trade. The label follows the sign: hitting the loss cap shows Loss Limit, hitting the profit target shows Profit Target. A trade keeps the limit it opened with until the trading service restarts; see [Risk management](/core-concepts/risk-management#the-cap-is-set-when-the-trade-opens).

**Closed Unfilled (Not Filled)** — A trade whose orders were placed but where none filled before the trade was closed — for example, limit orders that never triggered. Shows as "Not Filled" in the dashboard. Example: your limit orders sat below market for an hour, price never came back, and the trade timed out. It shows as Not Filled, not Failed, because nothing was ever at risk.

**Trade Status Self-Healing** — Automatic correction of a trade's final outcome from the underlying positions, so a trade can't stay mislabeled — for example, shown as a win when it actually closed at a loss.

### Channels

How channels map to accounts and how signals flow.

**Channel Assignment** — The link between a signal channel and a MetaTrader account. Assignments decide which accounts trade which channels; each can be independently active or paused. The assignment's status (not the channel itself) controls whether signals execute on a given account.

**Execution Mode** — Controls which signals a channel acts on: **Wait for Full Signal** (only signals with Entry + SL + at least one TP) or **Trade on First Alert** (act immediately on an alert, then apply follow-up details as modifications). See [Execution modes](/channels/execution-modes).

**Signal Pattern** — A classification of how a channel sends its signals: **Complete Signals** (everything in one message), **Alert Then Details** (alert first, details in a follow-up), or **Alerts Only** (directional alerts without full details). This is not a quality badge — it describes message shape, not channel quality.

**Channel Auto-Pause** — TTMT pauses a channel-account assignment automatically after repeated execution failures on that account, so a misbehaving channel can't keep failing silently. It pauses the *assignment*, not the channel for everyone.

**Multi-Account Broadcasting** — When a channel is assigned to several accounts, one signal becomes one trade per active assignment. Each account trades it with its own effective settings. See [Account broadcasting](/accounts/account-broadcasting).

**Channel Access Type** — How a channel is reached: **Public**, **Private (Paid)**, or **Private (Affiliate)**.

**Which signals are taken** — The Setup section of a channel that holds two different filters: the per-account **symbol allowlist** (Symbols) and the channel-wide text blacklist (**Skip posts containing**). See [Message filters](/channels/message-filters).

**Symbol Allowlist** — A per-account list that limits which symbols a channel is allowed to trade *on that account*. It scopes execution: a symbol not on the allowlist won't trade on that account. Distinct from the text blacklist, which filters messages for everyone.

**Text Blacklist** — A channel-wide list of words or phrases that make a message skip parsing and trading entirely. Matching is case-insensitive and whole-term (so "scalp" does not match "scalpel"), and it runs *before* the message is parsed. Replies bypass the blacklist, so close and modify follow-ups still work. If matching itself fails, the message is let through (fail-open). A blocked message shows the reason `blacklist_match:<term>` in the Signal Log. See [Message filters](/channels/message-filters).

**Execution Schedule (Blocked Hours)** — Time windows during which trading is **paused**. The windows mark *blocked* periods, not allowed ones. Account blocks and channel blocks combine — a signal is blocked if either scope blocks it — unless the channel's preset defines its own schedule, in which case the preset's schedule is used on its own. Each scope keeps its own timezone. A signal that lands in a blocked window is skipped, not queued for later. If the schedule can't be read, trading continues (fail-open).

### Connections & Providers

How TTMT connects to your broker, and the states you see for that connection.

**MetaAPI Cloud** — The connection provider TTMT picks when you connect an MT4 account, an MT5 account on a broker it does not support yet, or an MT5 account while no TTMT Direct connection is available. TTMT reaches your broker through MetaAPI's managed cloud. See [Connection providers](/accounts/self-host).

**TTMT Direct** — The connection provider TTMT usually picks for MT5 accounts on brokers it supports (when a TTMT Direct connection is available): TTMT's own connection to your broker instead of MetaAPI's cloud. TTMT picks it when you connect the account, and a MetaAPI Cloud MT5 account can move to it later if the dashboard offers the upgrade. See [Connection providers](/accounts/self-host).

**Market-Closed (Idle) State** — A neutral state shown when the broker's market is closed. It is not a lost connection and not an error. Signals that arrive while the market is closed are skipped immediately — no order is placed and nothing is replayed at reopen. Any reopening countdown you see is a display aid, not an execution promise.

**Settling / Provisional** — Live-view trust states for a trade whose numbers are still stabilizing (for example, right after it opens or while the price feed catches up). They tell you a value is not yet final, not that anything is wrong.

**Oracle** — A limited-preview trade-quality gate and advisor that scores a trade before it is placed. In its advisory mode it measures and notifies without blocking; in its enforcing mode it can hold a low-quality trade. It is off by default and rolled out selectively — available on request. See [Oracle](/oracle/).

### Overrides & Sharing

Presets, the override switches and preset sharing.

**Preset** — A named set of setting changes you give to a channel, per account, so different channels can trade differently while everything else follows your account defaults. A preset also carries optional trading hours and its own daily budget. You manage presets in **Settings › Presets**. See [Presets](/presets/). *See also: Config Profile, the old name for a preset.*

**Signal Override** — A switch that replaces a value from the signal with your own configured value. Three independent switches exist: **Always use my stop, not the signal's**, **Always use my TPs, not the signal's** and **Always use my zone, not the signal's**. When a switch is on, your value *always* replaces the signal's — useful when a channel sends unreliable levels. Example: your channel sends a 5-pip SL that's too tight. Turn on **Always use my stop, not the signal's** and TTMT uses your 60-pip stop instead.

**Override Mode — Fixed vs. Auto (entry zone)** — For the entry-zone override specifically, "Fixed" replaces the signal's zone with a zone you size yourself, applied immediately; "Auto" lets TTMT compute the zone from the stop-loss distance at execution time. This Fixed-vs-Auto choice exists only on the entry-zone override — the SL and TP overrides are simple on/off toggles. See [Override modes](/core-concepts/override-modes).

**Override (manual, on the broker)** — When you manually change a trade's SL or TP on your broker platform after TTMT placed it. The **When you change a trade yourself** setting controls whether TTMT keeps your change until the next signal, keeps it for good, or puts its own values back.

::: warning
If you change SL or TP at the broker, the **When you change a trade yourself** setting decides whether TTMT keeps your change. Check that setting before adjusting trades by hand.
:::

**Preset Share Code** — A short code that exports a preset so another user can import it. On export, settings the preset left to the account are filled in with their real values, so the preset imports identically for anyone. See [Preset sharing](/presets/preset-sharing).

**Symbol Remap (Symbol Mapping)** — How TTMT matches a signal's symbol (for example, GOLD) to your broker's symbol (for example, XAUUSD.m) across naming differences, using four matching strategies. See [Symbol mapping](/accounts/symbol-mapping).

**Symbol Alias Group** — A built-in set of equivalent symbol names (for example, XAUUSD = GOLD = XAU/USD). TTMT ships a set of these groups so common naming differences resolve automatically.

**Settings Wizard** — The guided setup that walks you through lot size, how the size is split across layers, and how profit is taken. It runs during onboarding and can be re-run from the settings page or when you add a new account.

**Trash & Restore** — The soft-delete tools for clearing finished trades, signals, and positions from your views. Only terminal or closed records can be trashed, using direct row selection (checkboxes on desktop, long-press on mobile) and a bulk-action bar. Deleting a trade also trashes its positions, and a trashed position can't be restored on its own. Trash is always reachable — nothing you remove is gone for good. See [Trash and restore](/dashboard/trash-and-restore).

**Kill Switch** — An emergency control that immediately closes open positions. Two scopes: close **all** positions (including manual trades) or close only **TTMT-managed** positions. See [Emergency controls](/safety-and-reliability/emergency-controls).

## General Trading Terms

Standard forex vocabulary, listed alphabetically.

**Balance** — The cash in your trading account, not counting the floating profit or loss of open trades.

**Drawdown** — The drop from a peak in your account value to a later low, usually shown as a percentage. A measure of how much your account fell during a losing stretch. Prop firms typically set maximum drawdown limits (for example, 5% daily, 10% total).

**Equity** — Your balance plus or minus the floating profit and loss of all open positions. This is what your account is actually worth right now, and it moves in real time as prices change.

**Free Margin** — The equity not tied up as margin for open positions — the amount available to open new trades. When free margin reaches zero, no new trades can be placed.

**Leverage** — How much position size your broker lets you control per unit of margin (for example, 1:100 means $1 controls $100 of assets). Higher leverage means a smaller margin requirement and larger swings in profit and loss.

**Lot Size** — The volume of a trade, measured in lots: a standard lot (1.00) is 100,000 units of the base currency; a mini lot (0.10) is 10,000 units; a micro lot (0.01) is 1,000 units.

**Magic Number** — An identifier the broker platform attaches to trades so they can be grouped or filtered. TTMT uses it to recognize the positions it manages and tell them apart from manual trades on the same account.

**Margin** — The deposit your broker holds to keep a leveraged position open. If equity falls too close to the required margin, the broker can issue a margin call or close positions.

**Pip** — The smallest standard price increment for a pair. For most pairs it is 0.0001 (the fourth decimal); for JPY pairs it is 0.01 (the second decimal). Stop-loss and take-profit distances are measured in pips.

**Slippage** — The difference between the price you expected and the price you actually got, common during fast moves or thin liquidity. It can be positive (better price) or negative (worse price).

**Spread** — The difference between the bid (sell) and ask (buy) price. You pay it on every trade, and it widens during news and off-hours. Tighter spreads mean lower costs.

**Stop Loss (SL)** — The price at which a losing trade closes automatically to cap the loss. TTMT sets a stop loss on every trade — from the signal, or from your default if the signal has none.

**Take Profit (TP)** — The price at which part or all of a trade closes automatically to lock in profit. TTMT supports up to six levels, TP1 through TP6, with volume split across them according to **How profit is taken** (the TP strategy).

## Related pages

* [Risk Limits and account halts](/safety-and-reliability/risk-limits-halt)
* [How orders are placed](/core-concepts/order-execution)
* [TP redistribution](/core-concepts/tp-redistribution)
* [Entry zone resolution](/core-concepts/entry-zone-resolution)
* [Entry zone expansion](/core-concepts/entry-zone-expansion)
* [Execution modes](/channels/execution-modes)
* [Message filters](/channels/message-filters)
* [Settings inheritance](/channels/settings-inheritance)
* [Symbol mapping](/accounts/symbol-mapping)
* [Connection providers](/accounts/self-host)
* [Oracle](/oracle/)
* [Account broadcasting](/accounts/account-broadcasting)
* [Preset sharing](/presets/preset-sharing)
* [Trade Log](/dashboard/trade-log)
* [Trash and restore](/dashboard/trash-and-restore)
* [Quick Reference](/reference/quick-reference)
* [Settings Contract](/reference/settings-contract)
