---
url: /reference/settings-contract.md
description: >-
  A grouped reference of every TTMT trading setting — its default, its range or
  options, and how it behaves — derived from the live platform.
---

# Settings Contract

This is the source-of-truth reference for what each trading setting defaults to, what values it accepts, and how it behaves. It is grouped the way the settings live in the platform, so you can find a control without hunting.

::: info Defaults are new-account starting points
A **default** here is the value a **new account** starts with. Editing this documentation never changes anything in your account — your saved settings are always preserved. If you've already tuned a setting, that saved value stays as it is; the default only fills in for brand-new accounts and any setting you never touched.
:::

Setting names here are the names the trading engine uses. A Settings screen may word a control differently, for example the engine’s “Fixed Risk” is shown as “Fixed amount” on the Size per trade screen, so follow the **Where** line to find it. See [Settings](/settings/) for how the screens are laid out.

Where the platform is currently inconsistent about an exact number, this page describes the behavior as a range or a group rather than printing a figure that might not match what you see. Those cases are called out inline.

## Sizing

How much volume each trade uses, and how it is split.

* **Base Position Size** — `fixed` · `fixed` / `percentage` / `fixed_usd` · Sets how each trade gets its size. Every trade can use the same lot size. Or the size can come from a percentage of your account balance. Or every trade can risk a fixed amount of money. Where: Settings › Size per trade. `volumeMode`
* **Fixed Lots** — `0.1` · number · Sets the lot size for every trade when the size method is fixed lots. Where: Settings › Size per trade. `fixedVolumeLots`
* **% of Balance** — `2` · number · Sets the percentage of your account balance that each trade risks. This applies when the size method is a percentage. Where: Settings › Size per trade. `riskPercentPerTrade`
* **Fixed Risk** — `null` · number · Sets the amount of money that each trade risks, in the account currency. This applies when the size method is a fixed risk amount. Where: Settings › Size per trade. `fixedRiskAmount`
* **Count broker credit as tradable capital** — `true` · On / off · Sets if TTMT adds broker credit to the balance when it calculates a size from a percentage. Where: Settings › Size per trade. `countCreditAsCapital`
* **Number of Layers** — `4` · number · Sets the number of entry layers in the entry zone, from 1 to 6. Layer 1 is nearest to the market price. The last layer is the deepest. Where: Settings › Entries. `numberOfLayers`
* **Orders per Layer** — `3` · number · How many separate orders each entry layer is split into. TTMT works this out for every trade from your size and the broker’s minimum lot; the stored value is not used. Where: no dashboard control. **\[derived by the engine]** Each layer gets as many orders as its share of the trade’s lots covers in whole broker minimum lots, up to 6. The number of take-profit levels plays no part: take profits are handed to the orders after the orders exist. A layer too small for one minimum lot is skipped and its lots move to the other layers; layer 1 instead takes one minimum lot from them when the trade can afford it. Layers can hold different numbers of orders, so a trade’s total is the sum across its layers, at most 36. There is no control for it. For more or fewer orders, change the position size, the number of entry layers, or how the size is split across layers. `ordersPerLayer`
* **Volume Allocation** — `standard` · `standard` / `low-balance` / `custom` · Intended to select how volume is distributed across entry layers; stored and shown on a trade’s settings snapshot, but not yet applied. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. The volume split across layers is fixed by the entry strategy today. `volumeAllocation`
* **Minimum Order Volume** — `0.01` · number · Intended as the smallest lot size any single order may be placed at; stored and shown on a trade’s settings snapshot, but not yet applied. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. The broker’s own minimum lot size still applies and is what actually bounds order size today. `minOrderVolume`
* **Entry Strategy (Layer Distribution)** — `even` · `even` / `front-loaded` / `martingale` / `single` · Sets how TTMT divides the trade volume between the entry layers. The options are: equal volume, more volume on the first layer, more volume on the deepest layer, or all in one. Where: Settings › Entries. `entryStrategy`

## Entry

Where and how orders are placed within the entry zone.

* **Entry Zone Size** — `auto` · `auto` / `fixed` · Sets how TTMT calculates the width of the entry zone. It can be a percentage of the stop loss distance ("Dynamic"). Or it can be a fixed number of pips. Where: Settings › Entries. `entryZoneMode`
* **Fixed (pips)** — `null` · number · Sets the width of the entry zone in pips. This applies when the zone width is fixed pips. Where: Settings › Entries. `entryZoneSizePips`
* **Dynamic (% of Stop Loss)** — `80` · number · Sets the width of the entry zone as a percentage of the stop loss distance. TTMT first removes a 5-pip buffer in front of the stop. This applies when the zone width is dynamic. Where: Settings › Entries. `entryZonePercent`
* **Layer Entry Spacing** — `standard` · `standard` / `aggressive` / `conservative` · Intended to control how far apart the entry layers sit inside the zone; stored and shown on a trade’s settings snapshot, but not yet applied. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. Layer spacing today follows the entry zone width and the layer count. `layerEntrySpacing`
* **Entry Zone Expansion** — `false` · On / off · Makes a very narrow entry zone a few pips wider. Then the deeper layers do not all go on the same price. Where: Settings › Entries. `entryZoneExpansionEnabled`
* **pips expansion** — `null` · number · Sets how many pips TTMT adds to a narrow entry zone, from 1 to 20. Where: Settings › Entries. `entryZoneExpansionPips`
* **Execute Layer 1 at market on adverse move** — `false` · On / off · Opens layer 1 at the current market price when the price is already past the entry of the signal. Without this, layer 1 is a limit order that can stay unfilled. Where: Settings › Entries. `executeL1AtMarket`
* **Tolerance (pips)** — `5` · number · Sets how far past the entry price of the signal the market can be for a market entry. The range is 1 to 200 pips. Where: Settings › Entries. `l1MarketToleranceInPips`
* **Count the stop loss from** — `fill` · `fill` / `signal` · Sets the start point of your fixed-pips stop loss when layer 1 opens at market. The start point is the fill price of layer 1 or the entry price of the signal. Where: Settings › Entries. `slAnchorMode`
* **Best-Price Entry** — `false` · On / off · Puts layer 1 at the far edge of the entry zone, not near the market price. This gives a better price and a better reward-to-risk. But layer 1 is less likely to fill. Where: Settings › Entries. `bestPriceEntryEnabled`

## Overrides

When TTMT replaces a signal’s values with your own, and what happens when you move a stop or target yourself. See [Override modes](/core-concepts/override-modes).

* **Override signal entry zone** — `false` · On / off · Uses your entry zone width also when the signal gives its own zone. Where: Settings › Entries. `entryZoneOverrideSignal`
* **Override signal SL** — `false` · On / off · Uses your default stop loss distance, not the stop loss level from the channel. Where: Settings › Stop loss. `slOverrideSignal`
* **Override signal TPs** — `false` · On / off · Uses your default TPs, not the TP levels from the channel. Where: Settings › Take profits. `tpOverrideSignal`
* **Invalid SL Handling** — `use_default` · `use_default` / `use_signal` · Sets what TTMT does when the stop loss of a signal is not usable. An example is a stop loss on the wrong side of the entry. TTMT can use your default distance. Or TTMT can use the value from the signal. Where: Settings › Stop loss. `invalidSlBehavior`
* **Override Behavior** — `leave_as_is_restore_on_modify` · `force_restore` / `leave_as_is_never_touch` / `leave_as_is_restore_on_modify` · Sets what TTMT does when you move a stop loss or TP yourself in MT4 or MT5. TTMT can put its own value back. Or TTMT never changes the value again. Or TTMT keeps your value until the next signal update. Where: Settings › Channel updates. `behavior`

## Take Profit

Which targets are used, and how volume is split across them. See [TP redistribution](/core-concepts/tp-redistribution).

* **Default Stop Loss** — `60` · number · Sets the stop loss distance from entry, in pips. TTMT uses it when TTMT sets its own stop loss. Where: Settings › Stop loss. `defaultSLPips`
* **TP1** — `20` · number · Sets the TP1 distance from entry, in pips. TTMT uses it when TTMT sets its own TPs. Where: Settings › Take profits. `defaultTP1Pips`
* **TP2** — `40` · number · Sets the TP2 distance from entry, in pips. TTMT uses it when TTMT sets its own TPs. Where: Settings › Take profits. `defaultTP2Pips`
* **TP3** — `60` · number · Sets the TP3 distance from entry, in pips. TTMT uses it when TTMT sets its own TPs. Where: Settings › Take profits. `defaultTP3Pips`
* **TP4** — `80` · number · Sets the TP4 distance from entry, in pips. TTMT uses it when TTMT sets its own TPs. Where: Settings › Take profits. `defaultTP4Pips`
* **TP5** — `100` · number · Sets the TP5 distance from entry, in pips. TTMT uses it when TTMT sets its own TPs. Where: Settings › Take profits. `defaultTP5Pips`
* **TP6** — `120` · number · Sets the TP6 distance from entry, in pips. TTMT uses it when TTMT sets its own TPs. Where: Settings › Take profits. `defaultTP6Pips`
* **TP Distance Unit** — `pips` · `pips` / `rr_percent` · Sets the unit of your TP distances: pips, or a multiple of the stop loss distance. Where: Settings › Take profits. `tpDistanceMode`
* **TP1** — `100` · number · Sets the TP1 distance as a percentage of the stop loss distance. 100 is 1 times the risk. 300 is 3 times the risk. Where: Settings › Take profits. `defaultTP1RrPercent`
* **TP2** — `200` · number · Sets the TP2 distance as a percentage of the stop loss distance. 100 is 1 times the risk. 300 is 3 times the risk. Where: Settings › Take profits. `defaultTP2RrPercent`
* **TP3** — `300` · number · Sets the TP3 distance as a percentage of the stop loss distance. 100 is 1 times the risk. 300 is 3 times the risk. Where: Settings › Take profits. `defaultTP3RrPercent`
* **TP4** — `400` · number · Sets the TP4 distance as a percentage of the stop loss distance. 100 is 1 times the risk. 300 is 3 times the risk. Where: Settings › Take profits. `defaultTP4RrPercent`
* **TP5** — `500` · number · Sets the TP5 distance as a percentage of the stop loss distance. 100 is 1 times the risk. 300 is 3 times the risk. Where: Settings › Take profits. `defaultTP5RrPercent`
* **TP6** — `600` · number · Sets the TP6 distance as a percentage of the stop loss distance. 100 is 1 times the risk. 300 is 3 times the risk. Where: Settings › Take profits. `defaultTP6RrPercent`
* **TP Strategy (Profit Distribution)** — `progressive` · `progressive` / `balanced` / `extended` / `1tp` / `2tp` / `3tp` / `runner` · Sets how TTMT divides the trade volume across the TPs. More volume at the first TPs takes profit early. Equal volume puts the same share at each TP. More volume at the last TPs follows the trend. Where: Settings › Take profits. `tpStrategy`
* **Active TP Levels** — `Keep signal` · number · Sets how many TPs a trade uses. Set a limit from 1 to 6. Or select "Keep signal" to use all TPs from the signal. Where: Settings › Take profits. `tpCountLimit`
* **Open TP (Runner Positions)** — `disabled` · `disabled` / `last_tp_open` · Lets the last TP run with no fixed target. This is a "runner". A trailing stop or you manage the runner. It does not close at a TP price. Where: Settings › Take profits. `openTpMode`
* **TP Fast Move Behavior** — `keep_original_tp` · `close_immediately` / `keep_original_tp` · Sets what TTMT does when a channel moves a TP to a price that the market already passed. TTMT can close the position immediately. Or TTMT can keep the original TP. Where: Settings › Channel updates. `tpFastMoveBehavior`

## Protection

Breakeven, trailing, stop management, and the Oracle’s pre-trade signal check.

* **Auto-Breakeven** — `1` · number · Sets the TP that moves the stop loss to breakeven when the price hits it. 0 turns off automatic breakeven. Where: Settings › Protect open trades. `autoBreakevenFromTPLevel`
* **Cancel pending orders when price reaches a take-profit** — `1` · number · Sets the TP that cancels the unfilled limit orders of the trade when the price hits it. With "Never", the orders continue to wait. Where: Settings › Protect open trades. `cancelLimitsFromTPLevel`
* **Which trades this cancels on** — `All trades` · `all` / `filled_only` · Applies the cancel above only to trades that have a filled entry. Without this, the cancel applies to all trades that reach the TP. Where: Settings › Protect open trades. `cancelLimitsScope`
* **Fast Market Protection** — `skip` · `skip` / `close` · Sets what TTMT does when a TP hits, the stop cannot move to breakeven, and price is already back past entry. Skip keeps the current stop and tries again when price moves away. Close closes that position at market. Where: Settings › Protect open trades. `tpBeUnfavorableAction`
* **Orphan Order Cleanup** — `true` · On / off · When the price hits the stop loss of a trade, this cancels the remaining unfilled orders of the trade. Then these orders cannot enter the losing setup again. Where: Settings › Stop loss. `cancelOrphansOnSL`
* **TP Already at Price** — `promote_to_next_tp` · `close_position` / `promote_to_next_tp` · Sets what TTMT does with an order when the market is already past its TP. TTMT can close the order at market. Or TTMT can move the order to the next TP. Where: Settings › Take profits. `tpAlreadyHitAction`
* **Breakeven Safety Net** — `true` · On / off · Lets the late-close safety net set breakeven. Sometimes TTMT finds a TP close only later, through P\&L recovery. Then TTMT moves the other open positions of the trade to breakeven, if the trade reached the Auto-Breakeven level. This setting does not turn Auto-Breakeven on or off. It also does not turn channel breakeven messages or manual breakeven on or off. Where: Settings › Protect open trades. `enabled`
* **Signal-Driven Breakeven** — `true` · On / off · Follows a channel message that tells you to move to breakeven. Examples are "risk free" and "move SL to entry". TTMT also continues to use your automatic trigger. Where: Settings › Channel updates. `signalBreakevenEnabled`
* **Buffer above entry** — `2` · number · Sets how many pips past the entry price TTMT puts the breakeven stop. Then spread and commission do not change a "breakeven" exit into a small loss. Where: Settings › Protect open trades. `bufferPips`
* **Breakeven once in profit** — `false` · On / off · Sets breakeven once the trade is a set distance in profit, measured from the worst filled entry: pips, R (distance from the worst filled entry to the stop when the first order filled) or money in the account currency. Armed after the first fill; fires once per trade. Off by default. Where: Settings › Protect open trades. `thresholdEnabled`
* **Measure in** — `pips` · `pips` / `r` / `money` · 1R is the distance from the worst filled entry to the stop when the first order filled. Where: Settings › Protect open trades. `thresholdUnit`
* **When profit reaches** — `null` · number · Sets breakeven once the trade is this far in profit, measured from the worst filled entry. Waits until the first order fills. Where: Settings › Protect open trades. `thresholdValue`
* **Lock in profit at each TP** — `false` · On / off · When price reaches a TP, moves the stop of every open position to the price of an earlier TP, or to its own entry plus the breakeven buffer if that protects more. Works only while Auto-Breakeven is not Never or Breakeven once in profit is on. Off by default. Where: Settings › Protect open trades. `steppedStopEnabled`
* **Stop goes to** — `1` · number · Which earlier TP the stop goes to when price reaches a TP: the previous TP, or 2 or 3 TPs earlier. Only TPs with a price count. Where: Settings › Protect open trades. `steppedStopGap`
* **Breakeven Fallback** — `keep_original` · `keep_original` / `progressive_sl` / `close_position` · Sets what TTMT does when it cannot move the stop loss to breakeven. When the stop is too close to price or price is past entry, Keep original and Progressive SL keep the current stop and try again when price moves away, and Close position closes that position at market. For other broker errors TTMT retries first, then keeps the original stop, tries a stop 5, then 10, then 15 pips from entry, or closes the position. Where: Settings › Protect open trades. `fallbackAction`
* **Enable Trailing Stop** — `false` · On / off · Moves the stop loss behind a trade that is in profit. As the price moves on, the stop keeps more of the profit. Where: Settings › Protect open trades. `enabled`
* **Start trailing** — `after_breakeven` · `after_breakeven` / `after_tp` / `after_pips` / `at_once` / `after_money` · Sets when the trailing stop starts to follow price: after breakeven, after a TP, after a number of pips in profit, at once from the fill, or after an amount of open profit. Where: Settings › Protect open trades. `start`
* **After (After a TP)** — `1` · number · The TP level whose price starts the trailing stop when the start is "After a TP". Where: Settings › Protect open trades. `startTpLevel`
* **After (After pips in profit)** — `null` · number · The profit in pips, measured from the worst filled entry, that starts the trailing stop when the start is "After pips in profit". Where: Settings › Protect open trades. `startPips`
* **After (After an amount of profit)** — `null` · number · The open profit in the account currency that starts the trailing stop when the start is "After an amount of profit". Where: Settings › Protect open trades. `startMoney`
* **Positions** — `runner` · `runner` / `all_open` · Which positions of a trade trail: the last TP only, or every open position. Where: Settings › Protect open trades. `scope`
* **Move the stop only every** — `null` · number · The smallest move in pips before the trailing stop moves again. Empty means every move. Where: Settings › Protect open trades. `stepPips`
* **Trailing Distance** — `30` · number · Sets the distance in pips between the current price and the trailing stop. Where: Settings › Protect open trades. `distancePips`
* **Mode** — `shadow` · `off` / `shadow` / `enforce` · Sets what TTMT does with the decision of the Oracle about a signal. TTMT can ignore it. TTMT can record it but not act on it ("shadow"). Or TTMT can let the Oracle block the trade ("enforce"). Where: Settings › Signal checks. **Availability:** Available on request. `mode`
* **Strictness** — `balanced` · `lenient` / `balanced` / `strict` · Sets how easily the Oracle blocks a signal that it doubts. Where: Settings › Signal checks. **Availability:** Available on request. `strictness`
* **Notify when blocked** — `true` · On / off · Sends you a notification each time the Oracle blocks a signal. Where: Settings › Signal checks. **Availability:** Available on request. `notifyOnVeto`
* **Zone entry point** — `near` · `near` / `mid` / `far` · Sets the point of the entry zone that the Oracle uses to judge a signal: the near edge, the middle, or the far edge. Where: Settings › Signal checks. **Availability:** Available on request. `zoneEntry`

## Automation

How follow-up signals and close instructions are applied to open trades.

* **Behavior** — `auto_correct` · `auto_correct` / `reject_extremities` / `use_signal` · Sets what TTMT does with a signal price that is clearly wrong. Examples are a decimal point in the wrong place, an old price level, or a copy-paste error. TTMT can correct the price, reject the signal, or use the price as sent. Where: Settings › Signal checks. `extremityBehavior`
* **Signal Consistency Threshold (R:R)** — `0.3` · number · Sets the minimum reward-to-risk of the levels in a signal. Below this value, TTMT treats the levels as inconsistent. Where: Settings › Signal checks. `signalConsistencyThreshold`
* **TP Redistribution** — `true` · On / off · When another entry layer fills, TTMT divides the open orders of the trade again across its TPs. The new division agrees with your TP Strategy. TP prices do not move. Lot sizes do not change. Orders only change their TP level, so some orders get a nearer TP and some get a further TP. When this is off, each order keeps the TP level that it got first. Where: Settings › Protect open trades. `enabled`
* **Redistribution Timeout** — `5` · number · Intended to bound how long redistribution waits for further layers to fill before settling on the targets it has; stored, but no timer reads it. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. Stored per account: the row with no account attached is your template (global default), and each connected account gets its own row copied from it (channels/settings-inheritance). Redistribution fires on events — a layer filling, all layers filling, a follow-up. "Timeout" exists as one value of the trigger-reason list and nothing ever schedules it, so no elapsed time has ever caused a redistribution. `timeoutMinutes`
* **Redistribution Scenario Overrides** — `null` · JSON object · Intended to let you replace the redistribution table for particular fill scenarios; stored, but not yet applied. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. Redistribution today re-splits open orders across your TPs by your TP Strategy, with no per-scenario exceptions. `scenarioOverrides`
* **L1 Safety Lock** — `true` · On / off · After another layer fills, TTMT divides the TPs again. Then all layer 1 orders go to TP1. TTMT divides the other open orders around them. With the Extended strategy, the largest layer 1 order does not go to TP1. Where: Settings › Protect open trades. `l1LockEnabled`
* **Auto-update Stop Loss** — `true` · On / off · Applies a later stop loss change from the channel to the open trade. Without this, the original stop stays. Where: Settings › Channel updates. `autoUpdateSL`
* **Auto-update Take Profit** — `true` · On / off · Applies a later TP change from the channel to the open trade. Without this, the original TPs stay. Where: Settings › Channel updates. `autoUpdateTP`
* **Auto-execute partial closes** — `true` · On / off · Follows a channel instruction to close part of the position. Examples are "close half" and "take 50%". Without this, TTMT ignores the instruction. Where: Settings › Channel updates. `autoPartialClose`
* **Auto-execute full closes** — `true` · On / off · Follows a channel instruction to close the full trade. Examples are "close now" and "exit". Without this, the trade stays open until its stop loss or TPs close it. Where: Settings › Channel updates. `autoFullClose`
* **Position Selection** — `worst_first` · `worst_first` / `profit_only` / `proportional` · Sets which positions of a layered trade a partial close closes first. The options are: the worst positions, only the positions in profit, or a part of each position. Where: Settings › Channel updates. `partialCloseMode`
* **Also cancel pending orders when a partial close is taken** — `false` · On / off · Cancels the remaining unfilled limit orders of a trade after a channel partial-close instruction closes part of the trade. Then the trade cannot open new positions while you make it smaller. If the instruction comes before an order fills, it cancels all pending orders and ends the trade. Where: Settings › Channel updates. `cancelPendingOnSignalPartialClose`

## Risk

Account-level protection. Risk limits are **account-level** — a preset does not override them (a preset’s own daily P\&L limits are listed under Preset overrides). See [Risk Limits and account halts](/safety-and-reliability/risk-limits-halt).

* **Risk Level** — `normal` · `normal` / `mid` / `high` · A coarse risk-appetite label kept in the data model after its control was removed from the dashboard; stored, but not applied to any trade. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. Stored per account: the row with no account attached is your template (global default), and each connected account gets its own row copied from it (channels/settings-inheritance). The engine does size trades by a risk level, but it reads the one the SIGNAL carries — a same-named field on the parsed signal, not this stored setting. The resemblance is why this row looked enforced for as long as it did. Every account keeps the "normal" default unless it was set before the control was removed. `riskLevel`
* **Daily Loss Limit** — `5` · number · Sets the maximum daily loss as a percentage of the account. At this loss, TTMT halts the account for the rest of the day. Where: Settings › Daily limits. `maxDailyLossPercent`
* **Max Concurrent Trades** — `100` · number · Sets the maximum number of open trades on this account at one time. At the limit, TTMT skips new signals. Where: Settings › Daily limits. `maxOpenPositions`
* **Max Position Size %** — `2` · number · Intended as a ceiling on how much of the account a single position may represent; stored and returned, but not yet applied. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. To cap position size today, use the per-asset override’s Max Volume, which the engine does read. `maxPositionSizePercent`
* **Max Drawdown %** — `20` · number · Intended as a ceiling on account drawdown before trading stops; stored and returned, but not yet applied. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. The daily loss limit is the drawdown control the engine does enforce — use that rather than relying on this. `maxDrawdownPercent`
* **Minimum Risk/Reward Ratio** — `null` · number · Intended to reject signals whose reward-to-risk falls below a floor; stored and returned, but not yet applied. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. The Signal Consistency Threshold is a related check the engine does run, but it tests the signal’s internal arithmetic rather than filtering trades by quality. `minRiskRewardRatio`
* **Enable risk limits** — `false` · On / off · This is the main switch for the automatic daily halt. When it is off, the daily loss limits and profit limits below have no effect. Where: Settings › Daily limits. `riskLimitsEnabled`
* **Mode** — `percent` · `percent` / `fixed` · Sets the unit of the daily loss limit: a percentage of the account or an amount of money. Where: Settings › Daily limits. `dailyLossMode`
* **Daily Loss Limit** — `null` · number · Sets the maximum daily loss as an amount of money. At this loss, TTMT halts the account. This applies when the daily loss limit is a fixed amount. Where: Settings › Daily limits. `maxDailyLossAmount`
* **Mode** — `percent` · `percent` / `fixed` · Sets the unit of the daily profit target: a percentage of the account or an amount of money. Where: Settings › Daily limits. `dailyProfitMode`
* **Daily Profit Target** — `null` · number · Sets the maximum daily gain as a percentage of the account. At this gain, the account stops new trades for the rest of the day. Where: Settings › Daily limits. `maxDailyProfitPercent`
* **Daily Profit Target** — `null` · number · Sets the daily gain, as an amount of money, that stops new trades on the account for the day. This applies when the daily profit target is a fixed amount. Where: Settings › Daily limits. `maxDailyProfitAmount`
* **On Breach Action** — `false` · On / off · Sets what TTMT does at a daily limit. TTMT can stop new trades and also close all open positions on the account. Or TTMT can only stop new trades. Where: Settings › Daily limits. `dailyPnlCloseAll`
* **Per-Trade P\&L Limit** — `false` · On / off · Turns on fixed money limits for each trade. TTMT closes a trade when its loss or profit gets to the set amount. Where: Settings › Size per trade. `tradePnlLimitsEnabled`
* **Loss limit** — `null` · number · Sets the loss, as an amount of money, at which TTMT closes a trade. The stop loss of the trade does not change this. Where: Settings › Size per trade. `maxTradeLossAmount`
* **Profit limit** — `null` · number · Sets the profit, as an amount of money, at which TTMT closes a trade. The TPs of the trade do not change this. Where: Settings › Size per trade. `maxTradeProfitAmount`

## Preset overrides

What a preset can replace for the channels assigned to it, plus the preset’s own daily P\&L limits (which have no account-level counterpart to inherit from).

* **Volume Mode** — inherits the account value · `fixed` / `percentage` / `fixed_usd` · Sizes this preset’s trades by a fixed lot size, by a percentage of balance, or by a fixed amount of money, in place of the account setting. Where: Settings › Presets › a preset › Size per trade. `volumeMode`
* **Lot Size** — inherits the account value · number · The lot size used for this preset’s trades when its volume mode is fixed. Where: Settings › Presets › a preset › Size per trade. `fixedVolumeLots`
* **Risk % Per Trade** — inherits the account value · number · The share of balance risked per trade on this preset’s channels when its volume mode is percentage. Where: Settings › Presets › a preset › Size per trade. `riskPercentPerTrade`
* **Fixed risk per trade** — inherits the account value · number · The amount of money risked per trade on this preset’s channels when its volume mode is a fixed risk amount. Where: Settings › Presets › a preset › Size per trade. `fixedRiskAmount`
* **Risk Level** — inherits the account value · `normal` / `mid` / `high` · A coarse risk-appetite label for this preset; the control was removed from the preset editor but the field is kept in the data model. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. Left unset, this inherits the account setting: an unset preset field is not "off" — it simply falls back to whatever the account currently has configured (channels/settings-inheritance). Applies only to signals from channels assigned to this preset; every other channel keeps the account setting (channels/settings-inheritance). The editor’s own code notes it was removed from the UI and retained in the backend. `riskLevel`
* **Number of Layers** — inherits the account value · number · How many entry layers this preset’s trades are split into, from 1 to 6, in place of the account setting. Where: Settings › Presets › a preset › Entries. `numberOfLayers`
* **Entry Strategy** — inherits the account value · `even` / `front-loaded` / `martingale` / `single` · How volume is divided between this preset’s entry layers, in place of the account setting. Where: Settings › Presets › a preset › Entries. `entryStrategy`
* **Entry Zone Mode** — inherits the account value · `auto` / `fixed` · Whether this preset sizes the entry zone as a share of the stop distance or as a fixed pip width. Where: Settings › Presets › a preset › Entries. `entryZoneMode`
* **Entry Zone Size** — inherits the account value · number · The entry zone width in pips for this preset when its zone mode is fixed. Where: Settings › Presets › a preset › Entries. `entryZoneSizePips`
* **Entry Zone %** — inherits the account value · number · The entry zone width as a percentage of the stop distance, minus a 5-pip buffer kept in front of the stop, for this preset when its zone mode is auto. Where: Settings › Presets › a preset › Entries. `entryZonePercent`
* **Always Use My Zone Size** — inherits the account value · On / off · Uses this preset’s zone size even when the signal states a zone of its own. Where: Settings › Presets › a preset › Entries. `entryZoneOverrideSignal`
* **Entry Zone Expansion** — inherits the account value · On / off · Widens a narrow entry zone for this preset so the layers are not stacked together. Where: Settings › Presets › a preset › Entries. `entryZoneExpansionEnabled`
* **Expansion Pips** — inherits the account value · number · How many pips this preset widens a narrow entry zone by. Where: Settings › Presets › a preset › Entries. `entryZoneExpansionPips`
* **Override Signal SL** — inherits the account value · On / off · Replaces the signal’s stop loss with this preset’s default stop distance on its channels. Where: Settings › Presets › a preset › Stop loss. `slOverrideSignal`
* **Override Signal TPs** — inherits the account value · On / off · Replaces the signal’s take-profit levels with this preset’s defaults on its channels. Where: Settings › Presets › a preset › Take profits. `tpOverrideSignal`
* **Execute Layer 1 at Market on Adverse Move** — inherits the account value · On / off · Enters layer 1 at market when price has already moved past the signal’s entry, for this preset’s channels. Where: Settings › Presets › a preset › Entries. `executeL1AtMarket`
* **L1 Market Tolerance** — inherits the account value · number · How far past the signal’s entry this preset will still enter at market, in pips. Where: Settings › Presets › a preset › Entries. `l1MarketToleranceInPips`
* **Count the stop loss from** — inherits the account value · `fill` / `signal` · Which price this preset measures a fixed-pips stop from when layer 1 enters at market — the actual fill, or the signal’s stated entry. Where: Settings › Presets › a preset › Entries. `slAnchorMode`
* **Best-Price Entry** — inherits the account value · On / off · Places layer 1 at the far edge of the entry zone for this preset — a better price, a lower chance of filling. Where: Settings › Presets › a preset › Entries. `bestPriceEntryEnabled`
* **TP Strategy** — inherits the account value · `progressive` / `balanced` / `extended` · How this preset spreads volume across its take-profit levels — front-loaded, even, or back-loaded. Where: Settings › Presets › a preset › Take profits. `tpStrategy`
* **Active TP Levels** — inherits the account value · number · How many take-profit levels this preset’s trades use — a cap from 1 to 6, or "Keep signal" to use every target the signal gave. Where: Settings › Presets › a preset › Take profits. `tpCountLimit`
* **Open TP Mode** — inherits the account value · `disabled` / `last_tp_open` · Lets this preset’s final take-profit level run with no fixed target, as a runner. Where: Settings › Presets › a preset › Take profits. `openTpMode`
* **TP Already Hit Action** — inherits the account value · `close_position` / `promote_to_next_tp` · What this preset does with an order whose target the market has already passed — close it, or promote it to the next target. Where: Settings › Presets › a preset › Take profits. `tpAlreadyHitAction`
* **TP Distance Unit** — inherits the account value · `pips` / `rr_percent` · Whether this preset’s own targets are expressed in pips or as multiples of the stop distance. Where: Settings › Presets › a preset › Take profits. `tpDistanceMode`
* **Default SL** — inherits the account value · number · The stop-loss distance in pips this preset uses when the platform supplies its own stop. Where: Settings › Presets › a preset › Stop loss. `defaultSLPips`
* **Default TP1** — inherits the account value · number · The take-profit 1 distance in pips for this preset’s channels, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP1Pips`
* **Default TP2** — inherits the account value · number · The take-profit 2 distance in pips for this preset’s channels, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP2Pips`
* **Default TP3** — inherits the account value · number · The take-profit 3 distance in pips for this preset’s channels, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP3Pips`
* **Default TP4** — inherits the account value · number · The take-profit 4 distance in pips for this preset’s channels, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP4Pips`
* **Default TP5** — inherits the account value · number · The take-profit 5 distance in pips for this preset’s channels, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP5Pips`
* **Default TP6** — inherits the account value · number · The take-profit 6 distance in pips for this preset’s channels, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP6Pips`
* **Default TP1 (% of SL)** — inherits the account value · number · Where take-profit 1 sits for this preset’s channels as a percentage of the stop distance, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP1RrPercent`
* **Default TP2 (% of SL)** — inherits the account value · number · Where take-profit 2 sits for this preset’s channels as a percentage of the stop distance, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP2RrPercent`
* **Default TP3 (% of SL)** — inherits the account value · number · Where take-profit 3 sits for this preset’s channels as a percentage of the stop distance, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP3RrPercent`
* **Default TP4 (% of SL)** — inherits the account value · number · Where take-profit 4 sits for this preset’s channels as a percentage of the stop distance, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP4RrPercent`
* **Default TP5 (% of SL)** — inherits the account value · number · Where take-profit 5 sits for this preset’s channels as a percentage of the stop distance, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP5RrPercent`
* **Default TP6 (% of SL)** — inherits the account value · number · Where take-profit 6 sits for this preset’s channels as a percentage of the stop distance, replacing the account default. Where: Settings › Presets › a preset › Take profits. `defaultTP6RrPercent`
* **Invalid SL Behavior** — inherits the account value · `use_default` / `use_signal` · What this preset does with an unusable stop loss from a signal — substitute its default distance, or take the value as given. Where: Settings › Presets › a preset › Stop loss. `invalidSlBehavior`
* **Cancel Orphans on SL** — inherits the account value · On / off · Cancels this preset’s remaining unfilled orders once a trade’s stop loss has been hit. Where: Settings › Presets › a preset › Stop loss. `cancelOrphansOnSL`
* **Extreme Value Handling** — inherits the account value · `auto_correct` / `reject_extremities` / `use_signal` · Sets what TTMT does with a signal price that is clearly wrong. Examples are a decimal point in the wrong place, an old price level, or a copy-paste error. TTMT can correct the price, reject the signal, or use the price as sent. Where: Settings › Presets › a preset › Signal checks. `extremityBehavior`
* **Signal Consistency Threshold** — inherits the account value · number · The lowest reward-to-risk this preset accepts from a signal’s own levels before treating them as inconsistent. Where: Settings › Presets › a preset › Signal checks. `signalConsistencyThreshold`
* **Breakeven** — inherits the account value · On / off · Moves the stop to around entry on this preset’s trades once a chosen take-profit level is reached. Where: Settings › Presets › a preset › Protect open trades. `breakevenEnabled`
* **Signal-Driven Breakeven** — inherits the account value · On / off · Acts on this preset’s channels’ own "risk free" or "move SL to entry" instructions. Where: Settings › Presets › a preset › Channel updates. `signalBreakevenEnabled`
* **BE Buffer** — inherits the account value · number · How many pips beyond entry this preset places the breakeven stop, to cover spread and commission. Where: Settings › Presets › a preset › Protect open trades. `breakevenBufferPips`
* **Auto BE from TP Level** — inherits the account value · number · Which take-profit level triggers breakeven on this preset’s trades; 0 turns it off. Where: Settings › Presets › a preset › Protect open trades. `autoBreakevenFromTPLevel`
* **BE Fallback Action** — inherits the account value · `keep_original` / `progressive_sl` / `close_position` · What this preset does when the stop cannot move to breakeven. When the stop is too close to price, Keep original and Progressive SL try again when price moves away, and Close position closes that position. Where: Settings › Presets › a preset › Protect open trades. `beFallbackAction`
* **Fast Market Protection** — inherits the account value · `skip` / `close` · What this preset does when a TP hits, the stop cannot move to breakeven, and price is already back past entry: keep the stop and try again, or close that position. Where: Settings › Presets › a preset › Protect open trades. `tpBeUnfavorableAction`
* **Breakeven once in profit** — inherits the account value · On / off · Sets breakeven once the trade is a set distance in profit, measured from the worst filled entry: pips, R (distance from the worst filled entry to the stop when the first order filled) or money in the account currency. Armed after the first fill; fires once per trade. Off by default. Where: Settings › Presets › a preset › Protect open trades. `breakevenThresholdEnabled`
* **Measure in** — inherits the account value · `pips` / `r` / `money` · 1R is the distance from the worst filled entry to the stop when the first order filled. Where: Settings › Presets › a preset › Protect open trades. `breakevenThresholdUnit`
* **Profit to reach** — inherits the account value · number · Sets breakeven once the trade is this far in profit, measured from the worst filled entry. Waits until the first order fills. Where: Settings › Presets › a preset › Protect open trades. `breakevenThresholdValue`
* **Lock in profit at each TP** — inherits the account value · On / off · When price reaches a TP, moves the stop of every open position to the price of an earlier TP, or to its own entry plus the breakeven buffer if that protects more. Works only while Auto-Breakeven is not Never or Breakeven once in profit is on. Off by default. Where: Settings › Presets › a preset › Protect open trades. `steppedStopEnabled`
* **Stop goes to** — inherits the account value · number · Which earlier TP the stop goes to when price reaches a TP: the previous TP, or 2 or 3 TPs earlier. Only TPs with a price count. Where: Settings › Presets › a preset › Protect open trades. `steppedStopGap`
* **Trailing Stop** — inherits the account value · On / off · Follows this preset’s winning trades with the stop loss as price advances. Where: Settings › Presets › a preset › Protect open trades. `trailingStopEnabled`
* **Trailing Distance** — inherits the account value · number · How far behind price this preset’s trailing stop follows, in pips. Where: Settings › Presets › a preset › Protect open trades. `trailingStopDistancePips`
* **Start trailing** — inherits the account value · `after_breakeven` / `after_tp` / `after_pips` / `at_once` / `after_money` · When this preset’s trailing stop starts to follow price. Where: Settings › Presets › a preset › Protect open trades. `trailingStopStart`
* **After (After a TP)** — inherits the account value · number · The TP level that starts this preset’s trailing stop when its start is "After a TP". Where: Settings › Presets › a preset › Protect open trades. `trailingStopStartTpLevel`
* **After (After pips in profit)** — inherits the account value · number · The profit in pips that starts this preset’s trailing stop when its start is "After pips in profit". Where: Settings › Presets › a preset › Protect open trades. `trailingStopStartPips`
* **After (After an amount of profit)** — inherits the account value · number · The open profit in the account currency that starts this preset’s trailing stop when its start is "After an amount of profit". Where: Settings › Presets › a preset › Protect open trades. `trailingStopStartMoney`
* **Positions** — inherits the account value · `runner` / `all_open` · Which positions of this preset’s trades trail: the last TP only, or every open position. Where: Settings › Presets › a preset › Protect open trades. `trailingStopScope`
* **Move the stop only every** — inherits the account value · number · The smallest move in pips before this preset’s trailing stop moves again. Where: Settings › Presets › a preset › Protect open trades. `trailingStopStepPips`
* **Per-Trade P\&L Limit** — inherits the account value · On / off · Turns on hard cash limits per trade for this preset, closing a trade at a set loss or profit. Where: Settings › Presets › a preset › Size per trade. `tradePnlLimitsEnabled`
* **Max Trade Loss** — inherits the account value · number · The cash loss at which one of this preset’s trades is closed. Where: Settings › Presets › a preset › Size per trade. `maxTradeLossAmount`
* **Max Trade Profit** — inherits the account value · number · The cash profit at which one of this preset’s trades is closed. Where: Settings › Presets › a preset › Size per trade. `maxTradeProfitAmount`
* **TP Redistribution** — inherits the account value · On / off · When another entry layer fills, TTMT divides the open orders of the trade again across its TPs, to agree with the TP Strategy. TP prices do not move. Where: Settings › Presets › a preset › Protect open trades. `redistributionEnabled`
* **L1 Safety Lock** — inherits the account value · On / off · Locks layer 1 to the first take-profit on this preset’s trades once a deeper layer fills. Where: Settings › Presets › a preset › Protect open trades. `l1LockEnabled`
* **Cancel Limits from TP** — inherits the account value · number · Which take-profit level cancels this preset’s still-unfilled limit orders; 0 leaves them waiting. Where: Settings › Presets › a preset › Protect open trades. `cancelLimitsFromTPLevel`
* **Which trades this cancels on** — inherits the account value · `all` / `filled_only` · Which of this preset’s trades the cancellation above reaches — every trade, or only the ones where an entry has already filled. Where: Settings › Presets › a preset › Protect open trades. `cancelLimitsScope`
* **Auto Update SL** — inherits the account value · On / off · Applies a channel’s later stop-loss change to this preset’s open trades. Where: Settings › Presets › a preset › Channel updates. `autoUpdateSL`
* **Auto Update TP** — inherits the account value · On / off · Applies a channel’s later take-profit change to this preset’s open trades. Where: Settings › Presets › a preset › Channel updates. `autoUpdateTP`
* **Auto Partial Close** — inherits the account value · On / off · Acts on a channel’s instruction to close part of one of this preset’s positions. Where: Settings › Presets › a preset › Channel updates. `autoPartialClose`
* **Also cancel pending orders when a partial close is taken** — inherits the account value · On / off · Cancels the remaining unfilled limit orders on one of this preset’s trades once a channel’s partial-close instruction has actually closed part of it. If the instruction lands before anything has filled, it cancels every pending order and ends the trade instead. Where: Settings › Presets › a preset › Channel updates. `cancelPendingOnSignalPartialClose`
* **Auto Full Close** — inherits the account value · On / off · Acts on a channel’s instruction to close one of this preset’s trades outright. Where: Settings › Presets › a preset › Channel updates. `autoCloseFull`
* **Partial Close Strategy** — inherits the account value · `worst_first` / `profit_only` / `proportional` · Which of this preset’s layered positions a partial close takes off first. Where: Settings › Presets › a preset › Channel updates. `partialCloseMode`
* **TP Fast Move** — inherits the account value · `close_immediately` / `keep_original_tp` · What this preset does when a channel moves a target to a price the market has already passed. Where: Settings › Presets › a preset › Channel updates. `tpFastMoveBehavior`
* **Manual SL/TP Behavior** — inherits the account value · `force_restore` / `leave_as_is_never_touch` / `leave_as_is_restore_on_modify` · What this preset does when you move a stop or target yourself in MT4 or MT5. Where: Settings › Presets › a preset › Channel updates. `manualSlTpBehavior`
* **Oracle Mode** — inherits the account value · `off` / `shadow` / `enforce` · Whether the Oracle is off, recording its verdicts without acting, or blocking trades for this preset’s channels. Where: Settings › Presets › a preset › Signal checks. **Availability:** Available on request. `oracleMode`
* **Oracle Strictness** — inherits the account value · `lenient` / `balanced` / `strict` · How readily the Oracle vetoes a signal on this preset’s channels. Where: Settings › Presets › a preset › Signal checks. **Availability:** Available on request. `oracleStrictness`
* **Zone entry point** — inherits the account value · `near` / `mid` / `far` · Which point of the entry zone the Oracle judges this preset’s signals from. Where: Settings › Presets › a preset › Signal checks. **Availability:** Available on request. `oracleZoneEntry`
* **Daily Loss Limit** — no default · number · The cash amount this preset’s channels may lose in a day before they stop taking new trades. Where: Settings › Presets › a preset › Daily limits. `profileMaxDailyLoss`
* **Daily Profit Target** — no default · number · The cash amount this preset’s channels may gain in a day before they stop taking new trades. Where: Settings › Presets › a preset › Daily limits. `profileMaxDailyProfit`
* **Pause + close this profile's trades** — `false` · On / off · Whether hitting this preset’s daily budget also closes its open trades, or only stops new ones being opened. Where: Settings › Presets › a preset › Daily limits. `profileDailyCloseTrades`
* **Reverse signals** — `false` · On / off · Open the opposite trade to each signal: a sell signal opens a buy, a buy signal opens a sell. Where: Settings › Presets › a preset › Entries. `reverseSignals`

## Per-asset overrides

Overrides scoped to one asset class — Gold, indices, and so on — rather than the whole account.

* **Add Override** — no default · text · Which group of instruments this override covers — Forex Majors, Forex Minors, Metals, Indices, Crypto or Energies — or, for a single-instrument override, the instrument itself (e.g. XTIUSD), picked when you add it. Where: Settings › Symbol exceptions. `assetKey`
* **A single instrument…** — `group` · `group` / `symbol` · Whether the override covers a whole group of instruments or a single instrument. The dashboard creates both: pick a group, or "A single instrument…" and then the instrument. Where: Settings › Symbol exceptions. `assetType`
* **Volume Mode** — inherits the account value · `fixed` / `percentage` / `fixed_usd` · How positions on this asset class are sized — a fixed lot size, a percentage of balance, or a fixed cash risk — in place of your global sizing. Where: Settings › Symbol exceptions. `volumeMode`
* **Fixed Volume (lots)** — inherits the account value · number · The lot size used for every trade on this asset class when its volume mode is Fixed Lots. Where: Settings › Symbol exceptions. `fixedVolumeLots`
* **Risk % of Balance** — inherits the account value · number · The percentage of account balance risked per trade on this asset class when its volume mode is percentage. Where: Settings › Symbol exceptions. `riskPercent`
* **Fixed risk (account currency)** — inherits the account value · number · A fixed cash amount to risk per trade on this asset class, sized from the stop-loss distance. Where: Settings › Symbol exceptions. `fixedRiskUsd`
* **Max Volume (lots)** — inherits the account value · number · A hard ceiling on the total lot size any single trade on this asset class may reach, whatever the sizing calculation produces. Where: Settings › Symbol exceptions. `maxVolume`
* **Override active** — `true` · On / off · Whether the override is applied; every override the dashboard creates is active, and deleting it is the way to stop it applying. Where: no dashboard control. `enabled`
* **Stop Loss (pips)** — inherits the account value · number · The stop-loss distance used for this asset class when the platform supplies its own stop, in place of your global default. Where: Settings › Symbol exceptions. `defaultSlPips`
* **TP1 (pips)** — inherits the account value · number · The take-profit 1 distance used for this asset class when the platform supplies its own targets, in place of your global TP1 default. Where: Settings › Symbol exceptions. `defaultTp1Pips`
* **TP2 (pips)** — inherits the account value · number · The take-profit 2 distance used for this asset class when the platform supplies its own targets, in place of your global TP2 default. Where: Settings › Symbol exceptions. `defaultTp2Pips`
* **TP3 (pips)** — inherits the account value · number · The take-profit 3 distance used for this asset class when the platform supplies its own targets, in place of your global TP3 default. Where: Settings › Symbol exceptions. `defaultTp3Pips`
* **TP4 (pips)** — inherits the account value · number · The take-profit 4 distance used for this asset class when the platform supplies its own targets, in place of your global TP4 default. Where: Settings › Symbol exceptions. `defaultTp4Pips`
* **TP5 (pips)** — inherits the account value · number · The take-profit 5 distance used for this asset class when the platform supplies its own targets, in place of your global TP5 default. Where: Settings › Symbol exceptions. `defaultTp5Pips`
* **TP6 (pips)** — inherits the account value · number · The take-profit 6 distance used for this asset class when the platform supplies its own targets, in place of your global TP6 default. Where: Settings › Symbol exceptions. `defaultTp6Pips`

## Trading Hours

The execution schedule signals are allowed to trade within.

* **Timezone** — no default · text · The timezone the blocked hours are read in, so a schedule stays put against your trading day rather than drifting with daylight saving. Where: Settings › Trading hours. `timezone`
* **Execution Schedule** — `[]` · JSON object · The hours of the week during which signals are not executed, painted on a Monday-to-Sunday grid. Where: Settings › Trading hours. `windows`

## Loss-streak reduction

Automatic position-size reduction after consecutive losses on a channel.

* **Loss-Streak Risk Reduction** — `false` · On / off · Turns on automatic size reduction for this channel and account after a losing trade, with full size restored by a winner. Where: Channel page › Setup. **Availability:** Limited preview. `enabled`
* **Compounding** — `compound` · `compound` / `fixed` · How fast size falls as losses stack up: "Compounding" halves again with each further loss, "Fixed 50%" drops to half and stays there. Where: Channel page › Setup. **Availability:** Limited preview. `curve`
* **Minimum risk floor** — `0.125` · number · The smallest fraction of your normal size a losing run can shrink to — 0.5, 0.25 or 0.125 (half, a quarter or an eighth). Where: Channel page › Setup. **Availability:** Limited preview. `floorMultiplier`
* **Reset to full size** — `session` · `session` / `continuous` · Whether the losing run is forgotten at the start of each trading session, or carries on until a winning trade clears it. Where: Channel page › Setup. **Availability:** Limited preview. `resetMode`
* **Also reduce if this channel has a losing trade open** — `false` · On / off · Counts a trade that is currently open and under water as a loss, so size is reduced before that trade has actually closed. Where: Channel page › Setup. **Availability:** Limited preview. `countOpenLosers`

## Channel settings

Per-channel signal handling — execution mode, defaults, and duplicate protection.

* **Signal Execution Mode** — `complete_only` · `complete_only` / `execute_on_alert` · Whether this channel’s signals are executed only once they carry an entry, a stop loss and at least one target, or immediately on the first alert with later messages applied as changes. Where: Channel page › Setup. `executionMode`
* **Update window** — `30` · number · How long after a signal a follow-up message from the same channel is still treated as an update to it rather than as a new signal. Where: no dashboard control. `followupWindowMinutes`
* **Duplicate protection** — `5` · number · How long a near-identical repeat of a signal from the same channel is ignored, so a re-post does not open the trade twice. Where: no dashboard control. `suppressionWindowMinutes`
* **Default Stop Loss** — `null` · number · The stop-loss distance used for this channel’s signals when the platform supplies its own stop. Where: Channel page › Setup. `defaultSlPips`
* **Default TP count** — `null` · number · Intended to say how many take-profit levels this channel’s signals use when the platform supplies its own targets; stored, but not yet applied. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. Set per channel and applied to that channel's signals only; leaving it unset falls back to the account setting (channels/settings-inheritance). The only code in the engine that reads this setting is never called by the running service — only its own tests exercise it — so no live path branches on it. The account-level Active TP Levels setting is where the number of targets is actually chosen. `defaultTpCount`
* **TP1** — `null` · number · The take-profit 1 distance used for this channel’s signals when the platform supplies its own targets. Where: Channel page › Setup. `defaultTp1Pips`
* **TP2** — `null` · number · The take-profit 2 distance used for this channel’s signals when the platform supplies its own targets. Where: Channel page › Setup. `defaultTp2Pips`
* **TP3** — `null` · number · The take-profit 3 distance used for this channel’s signals when the platform supplies its own targets. Where: Channel page › Setup. `defaultTp3Pips`
* **TP4** — `null` · number · The take-profit 4 distance used for this channel’s signals when the platform supplies its own targets. Where: Channel page › Setup. `defaultTp4Pips`
* **TP5** — `null` · number · The take-profit 5 distance used for this channel’s signals when the platform supplies its own targets. Where: Channel page › Setup. `defaultTp5Pips`
* **TP6** — `null` · number · The take-profit 6 distance used for this channel’s signals when the platform supplies its own targets. Where: Channel page › Setup. `defaultTp6Pips`
* **Limit Order Timeout** — `null` · number · How long this channel’s unfilled limit orders are left waiting before they are cancelled, in minutes. Where: Channel page › Setup. `limitOrderTimeoutMinutes`
* **Apply defaults to incomplete signals only** — `true` · On / off · Intended to confine this channel’s stop and target defaults to filling gaps in an incomplete signal rather than replacing levels it already carries; stored, but not yet applied. Where: no dashboard control. Enforcement planned (not yet applied by the engine): the value is stored and returned, but no part of the trading engine reads it yet — do not rely on it as a guardrail. Set per channel and applied to that channel's signals only; leaving it unset falls back to the account setting (channels/settings-inheritance). The engine reads the column into its channel-settings object and never branches on it. The account-level Signal Overrides card is where replacing a signal’s own levels is actually chosen. `applyToIncompleteOnly`
* **Correction window** — `30` · number · How long after a signal an edit or correction from the channel is folded into it instead of being read as a separate instruction, in seconds. Where: no dashboard control. `correctionWindowSeconds`
* **Two-phase signal** — `false` · On / off · Superseded flag for channels that post an alert first and the levels afterwards; the Signal Execution Mode setting replaced it. Where: no dashboard control. **\[deprecated]** Set per channel and applied to that channel's signals only; leaving it unset falls back to the account setting (channels/settings-inheritance). Kept so channels configured before the change keep resolving. Use Signal Execution Mode instead — set it to "execute on alert" for this behaviour. `twoPhaseSignal`
* **Follow-up suppression window** — `300000` · number · Superseded millisecond form of the duplicate-protection window; the minutes-based setting replaced it. Where: no dashboard control. **\[deprecated]** Set per channel and applied to that channel's signals only; leaving it unset falls back to the account setting (channels/settings-inheritance). Kept for channels configured before the change. Duplicate protection is expressed in minutes now. `followupSuppressionWindowMs`
* **Allow All Symbols** — `null` · list of strings · The instruments this channel is allowed to trade; with the allow-all switch on, every symbol the channel posts is accepted. Where: Channel page › What to take. `allowedSymbols`
* **Blacklisted words & phrases** — `null` · list of strings · Words and phrases that make the platform ignore a message from this channel entirely, for filtering out commentary, promotions and educational posts. Where: Channel page › What to take. `blacklistedStrings`
* **Allow all topics** — `null` · list of numbers · Which topics of a Telegram forum channel are watched; with the allow-all switch on, every topic is read. Where: Channel page › What to take. `allowedForumTopicIds`
* **Default Symbol** — `null` · text · The instrument assumed when this channel posts a signal without naming one — for a channel that only ever trades one market. Where: Channel page › Setup. `default_symbol`

## Account

Per-connected-account identity and control.

* **Click to rename** — no default · text · Your own name for this account, shown everywhere in the dashboard in place of the broker’s; clearing it restores the broker name. Where: Accounts page. `custom_name`
* **Currency** — no default · `USD` / `EUR` / `GBP` / `JPY` / `AUD` / `CAD` / `CHF` / `NZD` / `SGD` / `HKD` / `ZAR` · The currency this account is denominated in, used to format every balance, P\&L figure and cash limit shown for it. Where: Accounts page. **\[derived by the engine]** Set per connected account, so a demo and a live account can be named, denominated and paused independently. The broker connection overwrites this value from the account’s live status on every refresh, so a manual edit does not survive the next sync — the currency picker is worth using only to correct a display while the account is disconnected. The engine writes the column and reads it back only as a fallback for what it just wrote; no conversion arithmetic anywhere consults it. Totals across accounts in different currencies are never converted — the dashboard reports them per account. `base_currency`
* **Pause Trading** — `true` · On / off · Pausing an account stops it opening new trades while leaving the connection, the open positions and their management running. Where: Accounts page. `trading_enabled`
* **Disconnect** — `true` · On / off · Whether the account is connected; disconnecting takes it out of the platform entirely and stops all monitoring of it. Where: Accounts page. `is_active`

## Preferences

Display and locale preferences.

* **Display currency** — no default · text · The currency balances, profit and loss, and totals across your accounts are converted to for display. Account cards keep each account’s own currency. Where: Profile page. `display_currency`
* **Timezone** — `UTC` · text · The timezone used to present dates and times in the dashboard, defaulting to UTC. Where: no dashboard control. `timezone`
* **Locale** — `en-US` · text · The locale used to format numbers, dates and currency amounts in the dashboard, defaulting to en-US. Where: no dashboard control. `locale`

## Related pages

* [Quick Reference](/reference/quick-reference)
* [Glossary](/reference/glossary)
* [How orders are placed](/core-concepts/order-execution)
* [Override modes](/core-concepts/override-modes)
* [TP redistribution](/core-concepts/tp-redistribution)
* [Entry zone expansion](/core-concepts/entry-zone-expansion)
* [Position protection](/safety-and-reliability/position-protection)
* [Risk Limits and account halts](/safety-and-reliability/risk-limits-halt)
* [Runner positions](/trade-config/runners)

***

*This page is generated from the platform’s settings registry — see [How this page is generated](#generated-from-the-settings-registry) below. It updates automatically when a setting changes; it is never hand-edited.*

## Generated from the settings registry

This page is rendered by `scripts/gen-settings-contract.ts` from `docs/.generated/settings-registry.json`, a committed copy of the frontend's `settings-registry.json` export. Run `pnpm gen:settings-contract` after the registry changes, then commit both files — `pnpm build` fails (`--check`) if this page and the committed registry copy ever disagree.
