---
url: /trade-config.md
description: >-
  How TTMT turns a signal into trades: the Settings page and its sections, the
  open-vs-manage model, and how presets change your defaults for one channel.
---

# Trade Configuration

Trade Configuration is everything that decides how TTMT turns a Telegram signal into real trades on your account: your lot size, how a trade enters the market, where its profit targets and stop-loss sit, and how it is managed once it is open. Your settings apply to every channel by default, and you can change them for one channel with a preset. This page is the map.

::: tip
If you are just starting, set your size in **Settings › Size per trade**, pick a stop loss for signals that have none in **Settings › Stop loss**, and leave everything else on its defaults. Tune one thing at a time and watch the Trade Preview.
:::

## Two questions every setting answers

Every setting on these pages answers one of two questions. This is the way to think about them; the sections on the Settings page follow the same split.

**1. How does a trade open?** Your lot size, how the position is split into entry layers, the entry zone, the take-profit and stop-loss defaults, whether you trust the signal's levels or your own, and what happens to a malformed signal. This lives in [Order Setup](/trade-config/order-setup).

**2. How is an open trade managed?** Moving the stop to breakeven, trailing a runner, re-splitting your open orders across your take-profit levels as deeper layers fill, applying follow-up messages from the channel, respecting changes you make by hand, and trading-hours limits. This lives in [Active Trade Setup](/trade-config/active-trade-setup).

For example: Order Setup decides that a EUR/USD BUY opens as 4 entry layers with a 60-pip stop-loss and 3 take-profits. Active Trade Setup decides that once the first target hits, the stop moves to entry so the trade can no longer turn into a loss.

## Your settings page

Everything on this page lives on one **Settings** page with two tabs: **Account defaults** (the settings every channel on an account trades with) and **Presets** (named sets of changes you give to individual channels, or to single topics of a forum channel). Account defaults is split into twelve sections in five groups (Sizing, Entries & exits, Running trades, Account safety, Account tools). Pick a section in the list on the left, or on a phone, from the list of sections. The account slider at the top chooses which account you are editing; if you have unsaved edits it asks before switching.

| Group | Section | What you set there | Documented in |
|---|---|---|---|
| Sizing | **Size per trade** | How big each trade is, and the per-trade loss and profit limit | [Order Setup](/trade-config/order-setup) |
| Sizing | **Symbol exceptions** | A different size, stop or TPs for one symbol or asset class | [Per-Asset Overrides](/trade-config/per-asset-overrides) |
| Entries & exits | **Entries** | Entry layers, how the size is split across them, the entry zone | [Order Setup](/trade-config/order-setup) |
| Entries & exits | **Take profits** | How profit is taken, how many TPs to use, the TPs used when a signal has none | [Order Setup](/trade-config/order-setup) |
| Entries & exits | **Stop loss** | The stop used when a signal has none, and what to do with a bad one | [Order Setup](/trade-config/order-setup) |
| Entries & exits | **Signal checks** | What TTMT does with prices that look like typos, and the Oracle | [Order Setup](/trade-config/order-setup) |
| Running trades | **Protect open trades** | Breakeven, trailing stop, re-splitting orders across your TPs as layers fill, cancelling waiting orders | [Active Trade Setup](/trade-config/active-trade-setup) |
| Running trades | **Channel updates** | What a channel's follow-up messages may do to your open trades | [Active Trade Setup](/trade-config/active-trade-setup) |
| Account safety | **Daily limits** | The daily loss limit, max trades open at once, and what happens when a limit is hit | [Risk Limits](/safety-and-reliability/risk-limits-halt) |
| Account safety | **Trading hours** | Hours when no new trades open on this account | [Active Trade Setup](/trade-config/active-trade-setup#trading-hours) |
| Account tools | **Symbol mappings** | Your broker's names for symbols | [Symbol Mapping](/accounts/symbol-mapping) |
| Account tools | **Notifications** | What the TTMT Telegram bot tells you | [Notifications](/billing-and-account/notifications) |

The section list ends with two small boxes. **Set on each channel** lists what lives on a channel's own page instead (when to open, fallback SL/TP, symbols, blocked words, topics, limit-order timeout, hours, loss-streak sizing, preset per account), with a link to **Open a channel's Setup**. Topic rules for a forum channel are set per account in the channel's accounts table; see [Topic rules](/channels/channel-settings#topic-rules). **Elsewhere** points to **Accounts** for the account name, currency and pausing trading, and to **Profile** for display currency and timezone.

::: info Simple, Full and More settings
Each section shows the settings most people need first. The rest sit under **More settings** at the bottom of the section; open it, or switch the header from **Simple** to **Full** to see every setting at once. A section's nav entry shows how many of its settings differ from the TTMT default ("3 changed").
:::

::: info Nothing saves until you press Save
Your edits are kept as a draft. A save bar at the bottom lists each change ("Lot size: 0.10 → 0.20") with an undo button for each one, plus **Discard** and **Save**. Symbol exceptions, Symbol mappings and Notifications are the exceptions: they save as you change them, and Trading hours has its own **Save schedule** button. The **Preview** panel shows the effect of your edits on a sample trade before you save; see [Trade Preview](/trade-config/trade-preview).

If you try to leave with unsaved edits (a sidebar link, the browser back button or closing the tab), TTMT asks **Leave without saving?** first, and drafts are not kept once you leave. If a setting was changed in another tab or on another device while you were editing, saving first shows **Changed somewhere else**: for each setting you choose **Use theirs** or **Keep mine**.
:::

### Quick paths

* **One page.** The header switch **Sections / One page** shows every section on one long page, with **Jump to a section** links. On a desktop screen, accounts created before the new layout start on One page; everyone else, and every phone, starts on Sections. Your choice is remembered.
* **Quick edit.** In the Sections layout on a desktop, the **Quick edit** card at the top holds the settings people change most: size, entry layers and strategy, take profits, stop loss, and daily limits. Edits there join the same draft and save with the same save bar. Each row has a **More in …** link to its full section.
* **Explanations and the ? help.** The **Explanations** switch in the header (on by default) shows a short description under each setting and its options; turn it off for a denser page. The **?** next to a setting opens its help with an example. The choice is remembered.
* **Which value wins.** Each section ends with a **Which value wins** strip that lists where the value comes from, highest first, for example Symbol exception (if it sets a size) › Preset › Account defaults › TTMT default for **Size per trade**. It changes with your settings: with **Always use my stop** on, the signal's stop drops out of the Stop loss strip.
* **Search with ⌘K.** Press ⌘K (Ctrl+K on Windows) anywhere in the dashboard, or click **Search** in the header, and type at least two letters of a setting's name or a preset's name. Results appear under **Settings** ("Account defaults › Size per trade › Lot size") and **Presets**. Old names work too: the result then says which old name it matched. Pick a result and TTMT opens that section and highlights the setting, or opens the preset.
* **On a phone.** The Settings page opens on a list of the twelve sections with how many settings differ from the default in each; tap one to edit it in place and use the back arrow (**Back to all settings**) to return. Search opens as its own sheet.
* **Last changed and History.** The sections from Size per trade to Daily limits show **Last changed** with how long ago (hover for the exact time) and a **History** link. History lists the changes saved there, newest first, with the old and new value and where each came from, such as "from Settings" or "from Presets". If it can't load, it says **History unavailable · Retry** rather than guessing.

See [Start Here](/getting-started/start-here) for a short tour of the page, and [What Moved](/getting-started/what-moved) for where each old control lives now.

::: tip Every setting in one place
For the full list of settings with their defaults, ranges, and where they live, see the [Settings Contract](/reference/settings-contract) — the canonical reference this section links back to.
:::

## The adaptive engine in one paragraph

You choose how many **layers** to split each entry into (**1 to 6**, default **4**). TTMT then works out how many individual orders each layer needs from your lot size and your broker's minimum lot and lot step — more size means more orders, capped at **6 orders per layer** and **36 orders in total**. So "4 layers" is not a fixed order count: the same four layers might be 10 orders at one lot size and 12 at another. Layer 1 enters near the signal price; deeper layers wait as limit orders in case price retraces, averaging your entry to a better price. Orders are spread across your take-profit levels, and as deeper layers fill, TTMT can shift those targets to lock in profit on the now-larger position. The mechanics live in [Order Execution](/core-concepts/order-execution) and [Take-Profit Rebalancing](/core-concepts/tp-redistribution).

## How presets change your defaults

Your account defaults are the baseline for every channel. A **preset** given to a channel changes only the settings it sets; everything else comes from the account defaults of the account the channel runs on. On a forum channel with [topic rules](/channels/channel-settings#topic-rules), a topic's own preset takes the place of the channel's preset for that topic's signals on that account. There is no deeper stack — it is exactly two layers. Symbol exceptions win for their symbol's size, and for its stop and TPs unless an "Always use my…" toggle is on; the account's daily limits always apply.

For example: your account default is 0.10 lots. You create an "Aggressive Gold" preset that sets 0.30 lots and give it to one gold channel. Only that channel trades at 0.30; every other channel still uses your 0.10 default.

One preset can run on several channels and on several accounts. Because the settings a preset leaves alone come from each account's own defaults, the same preset can trade a little differently on two accounts. When you open a preset that runs on two or more accounts, each setting it leaves alone lists its value on every one of those accounts and is tagged **differs by account** when they disagree; **Set this preset's value** gives the preset one value of its own for that setting. The preset's first section, **Where it runs**, shows which channels use it on which account, including forum topics that use it through a topic rule, and lets you change that. To change one setting on many presets at once, use **Select** and **Change a setting…** in **Settings › Presets**. See [Organizing Presets](/presets/organizing-presets).

```mermaid
flowchart LR
  A[Signal arrives] --> B{Channel has<br/>a preset?}
  B -->|Yes| C[Preset settings win,<br/>the rest come from<br/>account defaults]
  B -->|No| D[Account defaults]
  C --> E[Engine splits<br/>into layers]
  D --> E
  E --> F[Orders placed<br/>across entry zone]
  F --> G[Trade managed:<br/>breakeven, rebalance,<br/>trailing]
  G --> H[Closed]
```

::: warning
Symbol exceptions (per-asset overrides) are **not** a third settings layer. They set a different size, stop or TPs for one symbol or asset class, such as gold or indices, and for that symbol they win over presets and account defaults for size, and for the fallback stop and TPs (unless an "Always use my…" toggle is on). They do not change entry strategy, breakeven, or anything else. A preset changes settings for one channel; a symbol exception changes size and default pips for every trade on one symbol or asset class across all channels. They are different tools.
:::

## Ideal Settings & Trading Strategy

### Scenario 1 — Conservative First-Timer

**Setup:** A new $1,500 account following one channel that posts complete signals.

**Settings:** Size per trade — Fixed lots 0.02. Entries — Even, with 4 entry layers. Take profits — Most at first TPs. Stop loss — 60 pips when the signal has none, "Always use my stop" off. Signal checks — "Correct them." Protect open trades — move the stop to entry at TP1, trailing off, "Move TPs closer when deeper layers fill" on. Channel updates — "Keep it until the next signal" when you change a trade yourself. No presets yet. Daily limits — a 5% daily-loss cap.

**Why:** One channel, the smallest practical lot size, and early profit-taking keep losses tiny while you learn how settings translate into trades in the Trade Preview.

**Watch for:** At 0.02 lots the deepest layers may be too small for the broker to fill — that is fine while you are learning. The viability badge will tell you.

**Switch when:** You add a second channel with a different style. That is the moment to create your first preset.

### Scenario 2 — Moderate Multi-Channel Trader

**Setup:** A $10,000 account following three channels: a calm forex one, a fast gold one, and a swing one.

**Settings:** Tune your account baseline for the calm forex channel (Fixed lots 0.15, Even with 4 entry layers, Most at first TPs, stop-loss 50 pips). Then build two presets: a "Fast Gold" preset (More at first with 3 entry layers, a tighter zone, "Close at once" when price is already past a TP at entry) given to the gold channel, and a "Swing" preset (Most at last TPs, "As the signal" TP count, trailing on a runner) given to the swing channel. Daily limits — a 4% daily cap.

**Why:** One baseline plus two targeted presets lets each channel trade in its own style without re-tuning the whole account.

**Watch for:** A preset only changes the settings it sets. Leave a setting alone and it comes from your account default, which may not suit that channel.

**Switch when:** A channel's instrument behaves so differently that you need different stop-loss and take-profit pips for it specifically — add a [symbol exception](/trade-config/per-asset-overrides).

### Scenario 3 — Prop-Firm Trader

**Setup:** A $100,000 challenge account with strict daily-drawdown rules, following two fast channels.

**Settings:** A conservative account baseline (Fixed lots 0.25, Even with 3 entry layers, stop-loss 30 pips, "Always use my stop" on so every trade respects your stop). Daily limits set just inside the firm's daily loss line. Protect open trades — move the stop to entry at TP1. Channel updates — "Keep it for good" when you change a trade yourself. One preset per channel to fine-tune entry style.

**Why:** The daily-limit halt is the safety net that protects the challenge, the stop override guarantees no trade exceeds your planned risk, and early breakeven removes the chance of a winner reversing into a loss.

**Watch for:** A burst of fast signals can stack risk quickly. The daily halt is what stops a single bad hour from failing the challenge.

**Switch when:** You are funded and the rules loosen — relax "Always use my stop" and let winners run with Most at last TPs.

## Next steps

* [Order Setup](/trade-config/order-setup) — how trades open
* [Active Trade Setup](/trade-config/active-trade-setup) — how open trades are managed
* [Per-Asset Overrides](/trade-config/per-asset-overrides) — symbol exceptions: different defaults per symbol or asset class
* [Trade Preview](/trade-config/trade-preview) — simulate before you trade
* [Runners](/trade-config/runners) — positions that ride past the last fixed target
* [Loss-Streak Risk Reduction](/trade-config/loss-streak-risk-reduction) — experimental automatic sizing-down after losses
* [Presets](/presets/) — per-channel changes to your defaults
* [What Moved](/getting-started/what-moved) — where each old control lives now
* [Settings Contract](/reference/settings-contract) — every setting's default and range in one reference
